RE: Confused about Default Routes in RIP

From: Priestman Ward (RQ6) RLBUHT (Ward.Priestman@rlbuh-tr.nwest.nhs.uk)
Date: Thu Mar 20 2003 - 06:47:55 GMT-3

If the case you are talking about it is the output interface should be
stated not the next hop, and the eth 0 should have an ip that is
referenced by rip

Ie ip route 0.0.0.0 0.0.0.0 ethernet0

If you use the next hop you need to red static

Hope that helps

ward

-----Original Message-----
From: MADMAN [mailto:dmadlan@qwest.com]
Sent: 19 March 2003 19:15
To: Daniel Cisco Group Study
Cc: ccielab@groupstudy.com
Subject: Re: Confused about Default Routes in RIP

   Hmm, haven't done much RIP of late but I know there was a time a
simple redistribute static would work.

  Dave

Daniel Cisco Group Study wrote:
> Doyle & Solie both discuss the origination of default routes in
RIP.....
>
> Basically, add a static default route, pointing to an IP address or
interface within the RIP process, and a 0.0.0.0/0 is automatically
generated, and propagated (see my config below).
>
> However, I can't seem to replicate this! The only way I can originate
the default in RIP is to use "default-info originate" under the RIP
process.....
>
> Why the discrepancy? Is the Doyle / Solie method only applicable to
older IOS versions, and the default-info originate method become the new
way of doing things?
>
> My configs for the Doyle / Solie method is as follows: (no 0.0.0.0/0
is generated)
>
> interface Loopback2
> ip address 10.1.1.1 255.0.0.0
> !
> interface Ethernet0
> ip address 128.100.1.13 255.255.255.0
> !
> router rip
> network 10.0.0.0
> network 128.100.0.0
> !
> no ip http server
> ip classless
> ip route 0.0.0.0 0.0.0.0 10.1.1.2
> !
>
>
> Regards,
>
> Daniel
>
>
>
> **********************************************************************
> This email and any files transmitted with it are confidential and
> intended solely for the use of the individual or entity to whom they
> are addressed. If you have received this email in error please notify
> the system manager.
> This footnote also confirms that this email message has been swept by
> MIMEsweeper for the presence of computer viruses.
> www.mimesweeper.com
> **********************************************************************
>
> 

-- 
David Madland
CCIE# 2016
Sr. Network Engineer
Qwest Communications
612-664-3367

I would rather have a German division in front of me than a French one 
behind me."
--- General George S. Patton

This archive was generated by hypermail 2.1.4 : Sat Apr 05 2003 - 08:51:42 GMT-3