From: ccie_studying (ccie_studying@hotmail.com)
Date: Wed Mar 19 2003 - 00:04:48 GMT-3
Would you please post ur configuration for both routers (ospf, interface,
and virtual link) ?
Thanks!
----- Original Message -----
From: "Syv Ritch" <syv@911networks.com>
To: <ccielab@groupstudy.com>
Sent: Sunday, March 16, 2003 3:28 AM
Subject: OSPF Missing routes with frame-relay
> Hi ccielab,
>
> I have 2 routers in an area connected to area 0 through a
> virtual link.
>
> 1 router have the area 0 routes, the other one does not.
> The routes are in the OSPF database, but they are placed
> into the routing table.
>
>
> Router 5 area 2 <<< router with the area 0 routes
> 172.16.4.0 & 172.16.99.0
>
>
> router ospf 10
> router-id 5.5.5.5
> log-adjacency-changes
> network 172.16.10.0 0.0.0.255 area 2
> network 172.16.30.0 0.0.0.255 area 2
> neighbor 172.16.10.2
>
> Summary Net Link States (Area 2)
>
> Link ID ADV Router Age Seq# Checksum
> 172.16.4.0 2.2.2.2 69 0x80000004 0x8BB3
> 172.16.99.0 2.2.2.2 69 0x80000004 0x6845
>
> c2505#r os
> 172.16.0.0/24 is subnetted, 5 subnets
> O 172.16.20.0 [110/1795] via 172.16.30.4, 00:08:09, Ethernet0
> O IA 172.16.4.0 [110/1845] via 172.16.30.4, 00:08:09, Ethernet0
> O IA 172.16.99.0 [110/1895] via 172.16.30.4, 00:08:09, Ethernet0
>
> c2505#o i s1
> Serial1 is up, line protocol is up
> Internet Address 172.16.10.1/24, Area 2
> Process ID 10, Router ID 5.5.5.5, Network Type NON_BROADCAST, Cost: 50
> Transmit Delay is 1 sec, State DR, Priority 1
> Designated Router (ID) 5.5.5.5, Interface address 172.16.10.1
> No backup designated router on this network
> Timer intervals configured, Hello 30, Dead 120, Wait 120, Retransmit 5
> Hello due in 00:00:12
> Index 2/2, flood queue length 0
> Next 0x0(0)/0x0(0)
> Last flood scan length is 3, maximum is 3
> Last flood scan time is 0 msec, maximum is 0 msec
> Neighbor Count is 1, Adjacent neighbor count is 1
> Adjacent with neighbor 7.7.7.7
> Suppress hello for 0 neighbor(s)
>
> c2505#s int s1
> Building configuration...
>
> Current configuration : 206 bytes
> !
> interface Serial1
> bandwidth 2000
> ip address 172.16.10.1 255.255.255.0
> encapsulation frame-relay
> frame-relay map ip 172.16.10.2 35 broadcast
> no frame-relay inverse-arp
> frame-relay lmi-type ansi
> end
>
>
> ***************************************************
> Router 7 area 2 <<< router w/o the area 0 routes
> 172.16.4.0 & 172.16.99.0
>
> router ospf 10
> router-id 7.7.7.7
> log-adjacency-changes
> network 172.16.10.0 0.0.0.255 area 2
> !
> Summary Net Link States (Area 2)
>
> Link ID ADV Router Age Seq# Checksum
> 172.16.4.0 2.2.2.2 1834 0x80000003 0x8DB2
> 172.16.99.0 2.2.2.2 1834 0x80000003 0x6A44
>
> c1602r#r os
> 172.16.0.0/24 is subnetted, 3 subnets
> O 172.16.30.0 [110/1795] via 172.16.10.1, 00:04:23, Serial1
> O 172.16.20.0 [110/3580] via 172.16.10.1, 00:04:23, Serial1
>
> c1602r#o i
> Serial1 is up, line protocol is up
> Internet Address 172.16.10.2/24, Area 2
> Process ID 10, Router ID 7.7.7.7, Network Type NON_BROADCAST, Cost: 1785
> Transmit Delay is 1 sec, State DROTHER, Priority 0
> Designated Router (ID) 5.5.5.5, Interface address 172.16.10.1
> No backup designated router on this network
> Timer intervals configured, Hello 30, Dead 120, Wait 120, Retransmit 5
> Hello due in 00:00:17
> Index 1/1, flood queue length 0
> Next 0x0(0)/0x0(0)
> Last flood scan length is 1, maximum is 2
> Last flood scan time is 0 msec, maximum is 4 msec
> Neighbor Count is 1, Adjacent neighbor count is 1
> Adjacent with neighbor 5.5.5.5 (Designated Router)
> Suppress hello for 0 neighbor(s)
>
> c1602r#s int s1
> !
> interface Serial1
> bandwidth 56
> ip address 172.16.10.2 255.255.255.0
> encapsulation frame-relay
> ip ospf priority 0
> frame-relay map ip 172.16.10.1 37 broadcast
> end
>
> --
> Thanks
> syv@911networks.com
This archive was generated by hypermail 2.1.4 : Sat Apr 05 2003 - 08:51:42 GMT-3