RE: Sparse-mode problems

From: Voss, David (dvoss@heidrick.com)
Date: Mon Mar 17 2003 - 23:10:13 GMT-3

• Next message: George Cassels: "ISDN with OSPF demand circuit"
• Previous message: Tim Fletcher: "Re: port filtering"
• Maybe in reply to: S kumar: "Sparse-mode problems"
• Next in thread: S kumar: "RE: Sparse-mode problems"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

Have you set up a mapping agent? Send the sh run from R5, or at least from
R5 S0.5.

-----Original Message-----
From: S kumar [mailto:ssoporie@yahoo.com]
Sent: Monday, March 17, 2003 7:02 PM
To: ccielab@groupstudy.com
Subject: Sparse-mode problems

All,

I configured multicast sparse-mode with R5 loopback as
RP.Also attached igmp-group to e0 of R5, but what is
happening is that I can't ping from R9 or even R7 or
R8.I can see the PIM neighbors correctly.
I am using a multipoint interface on R5 and rest of
the Routers are using Physical Interfaces as shown
below.

 
             R(9)
            |
            |
       / R7(S0)
      /
R5(S0.5)
| \
| \R8(S0)
|
R6

Do I need to do anything else when running Multicast
in NBMA mode. I read about using PIM NBMA mode, but
even that didn't help.

Any suggestions.

Thanks,

S K

• Next message: George Cassels: "ISDN with OSPF demand circuit"
• Previous message: Tim Fletcher: "Re: port filtering"
• Maybe in reply to: S kumar: "Sparse-mode problems"
• Next in thread: S kumar: "RE: Sparse-mode problems"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Sat Apr 05 2003 - 08:51:41 GMT-3