From: Brian Dennis (brian@labforge.com)
Date: Mon Mar 17 2003 - 03:06:21 GMT-3
From CCO:
The word "stopped" indicates that timing out of this entry is not
determined by this expire timer.
http://www.cisco.com/univercd/cc/td/doc/product/software/ios121/121newft
/121t/121t5/dtigmpv3.htm#1015409
Brian Dennis, CCIE #2210 (R&S/ISP Dial/Security) CCSI# 98640
brian@labforge.com
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
John Tafasi
Sent: Sunday, March 16, 2003 9:06 PM
To: ccielab
Subject: show ip igmp group (stopped)
Hi group,
Could some one explain what the word "stopped" means in the output of
the
"show ip igmp group" command executed on r7?
Thanks
John Tafasi
r7#show ip igmp group
IGMP Connected Group Membership
Group Address Interface Uptime Expires Last
Reporter
224.0.1.39 Ethernet1/0 05:56:31 00:02:10 150.50.7.7
224.0.1.39 Serial1/0 05:57:03 stopped 0.0.0.0
224.0.1.40 Ethernet1/0 05:56:30 00:02:06 150.50.7.7
r7#
r7#sh ip igmp int s1/0
Serial1/0 is up, line protocol is up
Internet address is 150.50.5.68/27
IGMP is enabled on interface
Current IGMP host version is 2
Current IGMP router version is 2
IGMP query interval is 60 seconds
IGMP querier timeout is 120 seconds
IGMP max query response time is 10 seconds
Last member query response interval is 1000 ms
Inbound IGMP access group is not set
IGMP activity: 4 joins, 3 leaves
Multicast routing is enabled on interface
Multicast TTL threshold is 0
IGMP querying router is 0.0.0.0 (this system)
Multicast groups joined (number of users):
224.0.1.39(1)
r7#
r7#
This archive was generated by hypermail 2.1.4 : Sat Apr 05 2003 - 08:51:40 GMT-3