From: Hunt Lee (huntl@webcentral.com.au)
Date: Sun Mar 16 2003 - 20:46:09 GMT-3
Silly me, I should use 0x2142 rather than 0x2101.
Anyway, all fixed now. And please ignore my previous email =)
Regards,
Lee
> -----Original Message-----
> From: Hunt Lee
> Sent: Monday, 17 March 2003 9:34 AM
> To: 'ccielab@groupstudy.com'
> Subject: Router problem, please help!!!
>
> I have a 2501 series router that I wanted to use...
>
> When I tried to bring it back on-line, it boots up normally and after the
> IOS is loaded with all the interface up message, the "press Enter key to
> proceed" didn't come out...
>
> So I tried to change the config-register to 0x2101, the router boots into
> ROM mode with that very old IOS, but again, the "press Enter to proceed"
> didn't come out...
>
> WHich I suspect that someone may have turned off EXEC mode or something on
> the startup-config...
>
> Is there anything I cuold do which can bypass the startup config?
>
> Currently, the router is in BootROM mode as follows:
> >?
> $ Toggle cache state
> B [filename] [TFTP Server IP address | TFTP Server Name]
> Load and execute system image from ROM or from TFTP server
> C [address] Continue execution [optional address]
> D /S M L V Deposit value V of size S into location L with modifier M
> E /S M L Examine location L with size S with modifier M
> G [address] Begin execution
> H Help for commands
> I Initialize
> K Stack trace
> L [filename] [TFTP Server IP address | TFTP Server Name]
> Load system image from ROM or from TFTP server, but do not
> begin execution
> O Show configuration register option settings
> P Set the break point
> S Single step next instruction
> T function Test device (? for help)
>
> Deposit and Examine sizes may be B (byte), L (long) or S (short).
> Modifiers may be R (register) or S (byte swap).
> Register names are: D0-D7, A0-A6, SS, US, SR, and PC
> >
>
>
> Best Regards,
> Lee
This archive was generated by hypermail 2.1.4 : Sat Apr 05 2003 - 08:51:40 GMT-3