From: eric (namaste@pacbell.net)
Date: Sun Mar 16 2003 - 03:19:31 GMT-3
I didnt see Brians response, But
Are you saying your summarizing on all 3 routers
ie... you say you are summarizing on r2 and r3 area 3 into area 0
your next line says " The A3 network, as it appears after area-range on R1"
are you summarizing on all 3 routers ?
Anyways good luck after a few hours you'll find it or it will wake you at
night with the answer.
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
Sage Vadi
Sent: Saturday, March 15, 2003 8:27 PM
To: Brian Dennis; ccielab@groupstudy.com
Subject: RE: OSPF: weird summarization issue
I agree, I remembered those rules the first time
somebody pointed them out on groupstudy. So these
areas are different areas I can quite safely say.
Also both the ABRs - have the same area ranges
configured on them..
R1---A0---+R2---A3
+R3---A3
R1 is a multipoint, R2/R3 physical serials. They have
a A3 network which they are summarzing into A0, but
the summarization does not works as desired:
The A3 network, as it appears after area-range on R1:
155.10.8.0/25 [110/84] via 155.10.11.3,
[110/84] via 155.10.11.1,
155.10.8.0/24 [110/74] via 155.10.11.3,
[110/74] via 155.10.11.1,
Any other thoughts Brian?
rgds,
Sage
This archive was generated by hypermail 2.1.4 : Sat Apr 05 2003 - 08:51:40 GMT-3