RE: OSPF: weird summarization issue

From: Sage Vadi (sagevadi@yahoo.co.uk)
Date: Sun Mar 16 2003 - 01:26:54 GMT-3

• Next message: Joe Chang: "Re: ATM - Config for SVC on point-to-point subinterface"
• Previous message: eric: "bgp defualt-origiinate"
• Maybe in reply to: Sage Vadi: "OSPF: weird summarization issue"
• Next in thread: Brian Dennis: "RE: OSPF: weird summarization issue"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

I agree, I remembered those rules the first time
somebody pointed them out on groupstudy. So these
areas are different areas I can quite safely say.

Also both the ABRs - have the same area ranges
configured on them..

R1---A0---+R2---A3
          +R3---A3

R1 is a multipoint, R2/R3 physical serials. They have
a A3 network which they are summarzing into A0, but
the summarization does not works as desired:

The A3 network, as it appears after area-range on R1:

155.10.8.0/25 [110/84] via 155.10.11.3,
              [110/84] via 155.10.11.1,
155.10.8.0/24 [110/74] via 155.10.11.3,
              [110/74] via 155.10.11.1,

Any other thoughts Brian?

rgds,
Sage

• Next message: Joe Chang: "Re: ATM - Config for SVC on point-to-point subinterface"
• Previous message: eric: "bgp defualt-origiinate"
• Maybe in reply to: Sage Vadi: "OSPF: weird summarization issue"
• Next in thread: Brian Dennis: "RE: OSPF: weird summarization issue"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Sat Apr 05 2003 - 08:51:40 GMT-3