From: tria_ka@gmx.net
Date: Sat Mar 15 2003 - 13:20:42 GMT-3
hi all,
assume the following lab:
First I'm not familar with the new 3550 sw
ospf SW1_ _SW2_ospf
--------R3------|___|====trunk===|___|---R5(VLAN_C)
VLAN_B | |
(eigrp) (eigrp)
| |
R6 R2
R6 and R2 are both running eigrp 100 and are in the same vlan 10.
Both running ospf also (but not on sthe switch ports). The redistribution
should be done on R6
Q:SW1 should be managed with an address from eigrp 100 range.
eigrp has an range 135.5.26.0/24 assume the SW2 will get an ip address
.7/24.
I understand this is done on SW2 with
interface vlan 10
ip address 135.5.26.7 255.255.255.0
through trunking this if is also announced to SW1 and the whole workgroup.
And if I understand I also must configure eigrp AND ospf on borth switches
because SW1 has R3 witch is running ospf 1 and also R6 witch is running eigrp
100.
Q: Should I also configure one vlan if each for both ospf vlans which have
different ip ranges ?
VLAN_C has 135.5.56.0/24 and VLAN_B 135.5.57.0/24
Q:When I want to route between this two vlan's i should create one vlan if
for each vlan ??
Last but not least:
Q: vlan 1 should be pruneeligble
While studying the 3550 docu there is no prossibilty to make vlan 1
pruneelible ??
That was it...
thanks
udo
-- +++ GMX - Mail, Messaging & more http://www.gmx.net +++ Bitte ldcheln! Fotogalerie online mit GMX ohne eigene Homepage!
This archive was generated by hypermail 2.1.4 : Sat Apr 05 2003 - 08:51:40 GMT-3