From: rusdi junaidi (rusdi@jakarta.omnes.slb.com)
Date: Sat Mar 15 2003 - 04:43:40 GMT-3
guys,
sorry if this not the topic we need to discuss but I need some help to
solve, that might be one of you have the same experience.
anyway, I have VoIP E1 -- FXS configuration. Main router has E1 interface
connected to PBX and the remote router has FXS ports connected to the
phones. Voice communication for both sites are working fine but I need the
feature such call forwarding to be able to deliver between FXS sites and
FXS ---E1
Question:
-- Is there anyway for cisco to deliver "call forwarding" ( hookflash)
between FXS sites ? for example calls from FXS (#1234) to the other FXS
(#4567) need to forward to the other FXS (#6789).
All I know call forwarding is working fine for FXO--FXS configuration by
adding "timing-hookflash-in/out" and "dtmf-relay h245"
The configuration for both routers:
----Main router----
isdn switch-type primary-qsig
controller E1 3/0
framing NO-CRC4
pri-group timeslots 1-31
interface Serial1/0
ip address 10.1.1.1 255.255.255.0
interface Serial3/0:15
no ip address
no logging event link-status
isdn switch-type primary-qsig
isdn incoming-voice voice
no cdp enable
voice-port 3/0:15
dial-peer voice 1 pots
destination-pattern 3T
direct-inward-dial
port 3/0:15
prefix 3
dial-peer voice 2 voip
destination-pattern 2922
session target ipv4:10.1.1.2
dial-peer voice 3 voip
destination-pattern 2955
session target ipv4:10.1.1.2
-----Remote routers------:
interface Serial1/0
ip address 10.1.1.2 255.255.255.0
voice-port 2/0/0
voice-port 2/0/1
dial-peer voice 2 pots
destination-pattern 2922
port 2/0/0
!
dial-peer voice 1 voip
destination-pattern 3T
session target ipv4:10.1.1.1
!
dial-peer voice 3 pots
destination-pattern 2955
port 2/0/1
thanks,
-rusdi-
This archive was generated by hypermail 2.1.4 : Sat Apr 05 2003 - 08:51:40 GMT-3