From: Voss, David (dvoss@heidrick.com)
Date: Sat Mar 15 2003 - 00:56:57 GMT-3
I think you may be making it harder than it really is:
access-list 101 permit ospf any any time-range maxtime
access-list 101 permit ip any any
-----Original Message-----
From: Stewart, Dirk [mailto:dirk.stewart@co.fulton.ga.us]
Sent: Friday, March 14, 2003 6:07 PM
To: ccielab@groupstudy.com
Subject: Question in logic anyone?
which one is better in logic to keep ospf from dialing on time only?
Is deny ospf on the whole better within the time or putting ospf in time
only access!
access-list 101 deny ospf any any
access-list 101 permit ospf any any time-range maxtime
access-list 101 permit ip any any time-range maxtime
OR
access-list 101 deny ospf any any time-range maxtime
access-list 101 permit ip any any time-range maxtime
!
time-range maxtime
periodic Friday Saturday 7:00 to 21:00
interface config -------------------------------------------------
!
interface BRI0
ip address 133.20.1.1 255.255.255.252
encapsulation ppp
ip ospf authentication message-digest
ip ospf message-digest-key 10 md5 cisco1
ip ospf cost 9999
ip ospf demand-circuit
dialer map ip 133.20.1.2 name R3 broadcast 7155491000
dialer map ip 133.20.1.2 name R3 broadcast 7155491001
dialer load-threshold 1 outbound
dialer-group 10
isdn switch-type basic-net3
ppp authentication chap
ppp multilink
-----------------------------------------------------------------------
The contents of this message have been scanned for viruses by
the TruSecure ShadowMail Service, and no viruses were found.
-----------------------------------------------------------------------
* This message has been processed by TruSecure's ShadowMail service
This archive was generated by hypermail 2.1.4 : Sat Apr 05 2003 - 08:51:40 GMT-3