RE: OSPF -> RIP

From: Scott M. Livingston (scottl@sprinthosting.net)
Date: Fri Mar 14 2003 - 11:57:52 GMT-3

• Next message: tria_ka@gmx.net: "Re: isdn - backup - challenge - authentication ???"
• Previous message: Jonathan V Hays: "RE: 2500 problem: Local Timeout (control reg=0x118)"
• Maybe in reply to: Janto Cin: "OSPF -> RIP"
• Next in thread: FATHALLAH: "RE: OSPF -> RIP"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

Thinking out load so correct if I am wrong... No you do not need to do
this for RIP. But, for OSPF ---> BGP you will need to use the match to
get your EXTERNAL OSPF networks into BGP.

Thanks,
scott

-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Janto Cin
Sent: Friday, March 14, 2003 3:11 AM
To: ccielab@groupstudy.com
Subject: OSPF -> RIP

Hi All,

R6(config-router)#red ospf 1 ?
  match Redistribution of OSPF routes
  metric Metric for redistributed routes
  route-map Route map reference
  vrf VPN Routing/Forwarding Instance
  <cr>

R6(config-router)#red ospf 1

I have to use match keyword so OSPF route can be redistribute to RIP, is
it
normal?
TIA,
Janto

• Next message: tria_ka@gmx.net: "Re: isdn - backup - challenge - authentication ???"
• Previous message: Jonathan V Hays: "RE: 2500 problem: Local Timeout (control reg=0x118)"
• Maybe in reply to: Janto Cin: "OSPF -> RIP"
• Next in thread: FATHALLAH: "RE: OSPF -> RIP"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Sat Apr 05 2003 - 08:51:39 GMT-3