From: Roberts, Larry (Larry.Roberts@expanets.com)
Date: Tue Mar 11 2003 - 22:45:42 GMT-3
I must be slow, it took me three times.. But I did laugh when I finally got
it..
Thanks
Larry
-----Original Message-----
From: Dennis Laganiere [mailto:dennisl@advancedbionics.com]
Sent: Tuesday, March 11, 2003 6:52 PM
To: 'Pratt, Jeremy'; 'CiscoJunkie'; Voss, David; ccielab@groupstudy.com
Subject: RE: ACL Tips and Tricks
I think it will make sense if you convert it to binary. Remember, there are
only 10 kinds of people in the world, those who understand binary, and those
who don't (read it again, it will make sense)... :-)
--- Dennis
-----Original Message-----
From: Pratt, Jeremy [mailto:JPratt@coh.org]
Sent: Tuesday, March 11, 2003 2:50 PM
To: 'CiscoJunkie'; Voss, David; ccielab@groupstudy.com
Subject: RE: ACL Tips and Tricks
I don't understand where you got the 11 in the first octet of the subnet
mask.
-----Original Message-----
From: CiscoJunkie [mailto:ciscojunkie@teamhealth.com]
Sent: Tuesday, March 11, 2003 12:52 PM
To: Voss, David; ccielab@groupstudy.com
Subject: Re: ACL Tips and Tricks
permit 196.95.160.0 11.0.0.255
----- Original Message -----
From: "Voss, David" <dvoss@heidrick.com>
To: <ccielab@groupstudy.com>
Sent: Tuesday, March 11, 2003 12:49 PM
Subject: ACL Tips and Tricks
> Permit the following subnets in an ACL with only 1 command... and deny
> all other subnets.... I don't believe this can be done with 1 command.
> Maybe someone can give it a shot?
>
> 204.95.160.0/24
> 199.95.160.0/24
This archive was generated by hypermail 2.1.4 : Sat Apr 05 2003 - 08:51:37 GMT-3