From: Scott M. Livingston (scottl@sprinthosting.net)
Date: Sat Mar 08 2003 - 22:44:09 GMT-3
Hunt,
frame-relay class <VoiceClassA> <---- Identifies the Shaping for all
the DLCI's
class <VoiceClassA> <--- Identifies Shaping just for the DLCI that has
been explicitly configured.
Ex.
R3(config-subif)#frame-relay interface-dlci 19
R3(config-fr-dlci)#class ?
WORD map class name
That's is how I understand it at least and how I use it.
Thanks,
scott
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Hunt Lee
Sent: Saturday, March 08, 2003 5:19 PM
To: ccielab@groupstudy.com
Subject: Voice
Hi Group,
I have 2 simple voice questions:-
1) What is the best way to see / view the load for VoIP & VoFR? Say,
when I make a
call, what command should I used to check the the call is active, and
how many
bandwidth (k) it is using per call etc
2) what is the difference between the "frame-relay class" command and
the "class"
command?
int s0/0.1
frame-relay class <VoiceClassA>
VS
int s0/0.1
frame-relay interface-dlci 101
class <VoiceClassA>
Thanks in advance,
Best Regards,
Hunt
http://mobile.yahoo.com.au - Yahoo! Mobile
- Check & compose your email via SMS on your Telstra or Vodafone mobile.
This archive was generated by hypermail 2.1.4 : Sat Apr 05 2003 - 08:51:35 GMT-3