From: stefan vogt (stefan-uwe_vogt@web.de)
Date: Sat Mar 08 2003 - 12:18:31 GMT-3
Hello Peter,
Thanks for your answer - seems I got the purpose of atm ilmi-pvc-discovery completely wrong.
Just to confirm, you are saying that atm ilmi-pvc-discovery is just to discover the vpi/vci pair and not for permanent use in a running config?
Thanks,
Stefan
"Peter" <peter@cyscoexpert.com> schrieb am 08.03.03 13:54:02:
>
> After discovering PVC remember the VPI/VCI pair, go ahead and remove "atm
> ilmi-pvc-discovery subinterface" command from the major interface, go back
> to the subinterface and create the PVC you just discovered with "pvc
> VPI/VCI" and type "inarp 1" under it. You should be able to ping the remote
> side now.
> After all the exercise was to discover the PVC.
>
> _____________________________
> Peter
> #7247 (R&S, Security)
> CyscoExpert Corp.
> 4433 W. Touhy Ave. Suite 410
> Lincolnwood, IL 60712
> Phone (847) 674-3392
> Toll Free (866) CyscoXP (297-2697)
> Fax (847) 674-2625
>
>
> ----- Original Message -----
> From: "stefan vogt" <stefan-uwe_vogt@web.de>
> To: <ccielab@groupstudy.com>
> Sent: Saturday, March 08, 2003 5:50 AM
> Subject: atm ilmi-pvc-discovery
>
>
> > Hello all,
> >
> > Just playing around with atm ilmi-pvc-discovery.
> > My config looks like this:
> > interface atm 2/0
> > pvc 0/16 ilmi
> > exit
> > atm ilmi-pvc-discovery subinterface
> > exit
> > !
> > interface atm 2/0.9 multipoint
> > ip address 172.16.10.6 255.255.255.0
> >
> > This one looks good:
> > r#sh atm vc
> > VCD / Peak Avg/Min
> Burst
> > Interface Name VPI VCI Type Encaps Kbps Kbps
> Cells Sts
> > 2/0 4 0 16 PVC ILMI 155000
> UP
> > 2/0.9 11 9 120 PVC-D SNAP 155000
> UP
> >
> > But ping to remote router fails. When doing debug ip packet:
> > 17:05:27: IP: s=172.16.10.6 (local), d=172.16.10.7 (ATM2/0.9), len 100,
> sending
> > 17:05:27: IP: s=172.16.10.6 (local), d=172.16.10.7 (ATM2/0.9), len 100,
> encapsul
> > ation failed.
> >
> > So I assume there is some mapping for the remote ip address missing. I
> searched CCO, but found no hint how to do this when using atm
> ilmi-pvc-discovery...
> >
> > Any input is welcome.
> > -Stefan
> >
> >
> ____________________________________________________________________________
> __
> > Den Komfort von WEB.DE FreeMail nutzen, aber die alten E-Mail-Adressen
> nicht
> > aufgeben? Kein Problem: http://freemail.web.de/features/?mc=021128
This archive was generated by hypermail 2.1.4 : Sat Apr 05 2003 - 08:51:35 GMT-3