From: stefan vogt (stefan-uwe_vogt@web.de)
Date: Sat Mar 08 2003 - 08:50:13 GMT-3
Hello all,
Just playing around with atm ilmi-pvc-discovery.
My config looks like this:
interface atm 2/0
pvc 0/16 ilmi
exit
atm ilmi-pvc-discovery subinterface
exit
!
interface atm 2/0.9 multipoint
ip address 172.16.10.6 255.255.255.0
This one looks good:
r#sh atm vc
VCD / Peak Avg/Min Burst
Interface Name VPI VCI Type Encaps Kbps Kbps Cells Sts
2/0 4 0 16 PVC ILMI 155000 UP
2/0.9 11 9 120 PVC-D SNAP 155000 UP
But ping to remote router fails. When doing debug ip packet:
17:05:27: IP: s=172.16.10.6 (local), d=172.16.10.7 (ATM2/0.9), len 100, sending
17:05:27: IP: s=172.16.10.6 (local), d=172.16.10.7 (ATM2/0.9), len 100, encapsul
ation failed.
So I assume there is some mapping for the remote ip address missing. I searched CCO, but found no hint how to do this when using atm ilmi-pvc-discovery...
Any input is welcome.
-Stefan
This archive was generated by hypermail 2.1.4 : Sat Apr 05 2003 - 08:51:35 GMT-3