From: Brian Dennis (brian@labforge.com)
Date: Fri Mar 07 2003 - 19:36:50 GMT-3
Looks like you have an NSAP incorrect.
4700010001000100010001000111101110111000 <-- On R6
4700010001000100010001000011101110111000 <-- On LS100
^
In the future you should use NSAPs that are easier to spot issues with
;)
Brian Dennis, CCIE #2210 (R&S/ISP Dial/Security)
brian@labforge.com
http://www.labforge.com
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
John Tafasi
Sent: Friday, March 07, 2003 3:13 PM
To: Tony Schaffran; Cisco Group Study; ccielab
Subject: Re: Problem with Lightstream 100, SVC
I corrected the ip address but the routers still can not complete the
call.
Here is the output of the debug atm sig-all after i configured the
switch
that connected routers are users no another switch:
r6#
04:02:04: ATMSIG(ATM0 0,0 - 0243/00): (vcnum:0) API -
alloc_connection_id F3
04:02:04:
ATMAPI: (c->s): SETUPv2 ci: 0xF3 mp: 0 ei: 0xFFFFFFFF
04:02:04: ATMSIG: Called len 20
04:02:04: ATMSIG: Calling len 20
04:02:04: ATMSIG(ATM0 0,0 - 0243/00): (vcnum:0) build Setup msg,
Null(U0)
state
04:02:04: ATMSIG(ATM0 0,0 - 0243/00): (vcnum:0) API - from sig-client
ATM_OWNER_SMAP
04:02:04: ATMSIG(ATM0 0,0 - 0243/00): (vcnum:245) Input event : Req
Setup in
Null(U0)
04:02:04: ATMSIG(ATM0 0,0 - 0243/00): (vcnum:245) Output Setup
msg(XferAndTx), Null(U0) state
04:02:04: ATMSIG: Called Party Addr:
47.000200020002000200020002.222022202220.00
r6#
04:02:04: ATMSIG: Calling Party Addr:
47.000100010001000100010001.111011101110.00
04:02:04: ATMSIG(ATM0 0,0 - 0243/00): (vcnum:245) Null(U0) -> Call
Initiated(U1)
04:02:04: E164 NOT Converted
04:02:04: ATMSIG(ATM0 0,0 - 0243/00): (vcnum:245) Input event : Rcvd
Release
Complete in Call Initiated(U1)
04:02:04: ATMSIG(ATM0 0,0 - 0243/00): (vcnum:245)cause = mandatory
information element is missing, location = User
04:02:04: ATMSIG(ATM0 0,0 - 0243/00): (vcnum:245) Call Initiated(U1) ->
Null(U0)
04:02:04: ATMSIG(ATM0 0,0 - 0243/00): (vcnum:245) API - notifying
Release
Complete event to client ATM0.1
04:02:04:
ATMAPI: (c<-s): RELEASE_COMPv2 ci: 0xF3 cause: 0x60
r6#
===================================
r9#
04:01:04: ATMSIG(ATM0 0,0 - 0233/00): (vcnum:0) API -
alloc_connection_id E9
04:01:04:
ATMAPI: (c->s): SETUPv2 ci: 0xE9 mp: 0 ei: 0xFFFFFFFF
04:01:04: ATMSIG: Called len 20
04:01:04: ATMSIG: Calling len 20
04:01:04: ATMSIG(ATM0 0,0 - 0233/00): (vcnum:0) build Setup msg,
Null(U0)
state
04:01:04: ATMSIG(ATM0 0,0 - 0233/00): (vcnum:0) API - from sig-client
ATM_OWNER_SMAP
04:01:04: ATMSIG(ATM0 0,0 - 0233/00): (vcnum:234) Input event : Req
Setup in
Null(U0)
04:01:04: ATMSIG(ATM0 0,0 - 0233/00): (vcnum:234) Output Setup
msg(XferAndTx), Null(U0) state
04:01:04: ATMSIG: Called Party Addr:
47.000200020002000200020002.222022202220.00
04:01:04: ATMSIG: Calling Party Addr:
47.000200020002000200020002.222022202220.00
04:01:04: ATMSIG(ATM0 0,0 - 0233/00): (vcnum:234) Null(U0) -> Call
Initiated(U1)
04:01:04: E164 NOT Converted
04:01:04: ATMSIG(ATM0 0,0 - 0233/00): (vcnum:234) Input event : Rcvd
Release
Complete in Call Initiated(U1)
04:01:04: ATMSIG(ATM0 0,0 - 0233/00): (vcnum:234)cause = mandatory
information element is missing, location = User
04:01:04: ATMSIG(ATM0 0,0 - 0233/00): (vcnum:234) Call Initiated(U1) ->
Null(U0)
04:01:04: ATMSIG(ATM0 0,0 - 0233/00): (vcnum:234) API - notifying
Release
Complete event to client ATM0.1
04:01:04:
ATMAPI: (c<-s): RELEASE_COMPv2 ci: 0xE9 cause: 0x60
----- Original Message -----
From: "Tony Schaffran" <tschaffran@cconlinelabs.com>
To: "John Tafasi" <johntafasi@yahoo.com>; "Cisco Group Study"
<cisco@groupstudy.com>; "ccielab" <ccielab@groupstudy.com>
Sent: Friday, March 07, 2003 1:18 PM
Subject: Re: Problem with Lightstream 100, SVC
> Your IP addresses are incorrect. It looks like you forgot the 8 in
108 on
> R6.
>
>
>
> Tony Schaffran
> Network Analyst
> CCIE #11071
> CCNP, CCNA, CCDA,
> NNCSS, NNCDS, CNE, MCSE
>
> www.cconlinelabs.com
> "Your #1 choice for Cisco rack rentals."
>
>
> ----- Original Message -----
> From: "John Tafasi" <johntafasi@yahoo.com>
> To: "Cisco Group Study" <cisco@groupstudy.com>; "ccielab"
> <ccielab@groupstudy.com>
> Sent: Friday, March 07, 2003 11:37 AM
> Subject: Problem with Lightstream 100, SVC
>
>
> > Hi Group,
> >
> > I have two atm routers that are connected to a Cisco Lightstream 100
atm
> > switch. I am trying to cause r6 to call r9 but the call does not
succeed.
> I
> > have configured svc routes on the switch and configured the two
routers
to
> > use svc to reach each other. Below you will find the necessary
> > configurations and output of the debug commands. From the output of
the
> > debug commands on the routers I can see that the routers could not
> register
> > their addresses with the arp server.
> >
> >
> > A
> >
> > r6#show run
> > Building configuration...
> >
> > Current configuration : 883 bytes
> > !
> > version 12.2
> > service timestamps debug uptime
> > service timestamps log uptime
> > no service password-encryption
> > !
> > hostname r6
> > !
> > !
> > ip subnet-zero
> > !
> > ip ssh time-out 120
> > ip ssh authentication-retries 3
> > !
> > !
> > !
> > !
> > interface Ethernet0
> > no ip address
> > shutdown
> > media-type 10BaseT
> > !
> > interface Ethernet1
> > no ip address
> > shutdown
> > media-type 10BaseT
> > !
> > interface Serial0
> > no ip address
> > shutdown
> > !
> > interface Serial1
> > no ip address
> > shutdown
> > !
> > interface ATM0
> > no ip address
> > atm pvc 1 0 5 qsaal
> > atm pvc 2 0 16 ilmi
> > no atm ilmi-keepalive
> > !
> > interface ATM0.1 multipoint
> > ip address 138.10.168.1 255.255.255.0
> > atm nsap-address 47.000100010001000100010001.111011101110.00
> > atm arp-server nsap 47.000200020002000200020002.222022202220.00
> > !
> > !
> > ip classless
> > no ip http server
> > ip pim bidir-enable
> > !
> > !
> > !
> > !
> > !
> > !
> > !
> > !
> > !
> > !
> > !
> > line con 0
> > exec-timeout 0 0
> > logging synchronous
> > line aux 0
> > line vty 0 4
> > login
> > !
> > end
> >
> > r6#
> >
> > =======================
> >
> > r9>ena
> > r9#show run
> > Building configuration...
> >
> > Current configuration : 643 bytes
> > !
> > version 12.2
> > service timestamps debug uptime
> > service timestamps log uptime
> > no service password-encryption
> > !
> > hostname r9
> > !
> > !
> > ip subnet-zero
> > !
> > ip ssh time-out 120
> > ip ssh authentication-retries 3
> > !
> > !
> > !
> > !
> > interface Ethernet0
> > no ip address
> > shutdown
> > !
> > interface Ethernet1
> > no ip address
> > shutdown
> > !
> > interface ATM0
> > no ip address
> > atm pvc 1 0 5 qsaal
> > atm pvc 2 0 16 ilmi
> > no atm ilmi-keepalive
> > !
> > interface ATM0.1 multipoint
> > ip address 138.108.168.2 255.255.255.0
> > atm nsap-address 47.000200020002000200020002.222022202220.00
> > atm arp-server self
> > !
> > !
> > ip classless
> > no ip http server
> > ip pim bidir-enable
> > !
> > !
> > !
> > !
> > !
> > !
> > !
> > !
> > !
> > !
> > !
> > line con 0
> > line aux 0
> > line vty 0 4
> > !
> > end
> >
> > r9#
> >
> >
> > ===================
> >
> >
> > LS100#show pvc 0
> > Bandwidth Available (Forward/Backward/Line Rate): 0.0 / 0.0 /
155.0
> Mbps
> > Existing connections : 0 (Uni), 2 (Bi), 0 (Multipoint),
2
> > (Gateway)
> > LowLine LowVPI LowVCI HiLine HiVPI HiVCI TrfType CONNECTION
> > 0 0 5 16 0 2 UBR-BE Gateway
> > 0 0 16 16 0 3 UBR-BE Gateway
> > 0 0 32 2 0 32 UBR-BE Bi
> > 0 0 100 2 0 101 VBR-GS Bi
> >
> > LS100#
> > LS100#
> > LS100#
> > LS100#
> > LS100#
> > LS100#show pvc 0
> > Bandwidth Available (Forward/Backward/Line Rate): 0.0 / 0.0 /
155.0
> Mbps
> > Existing connections : 0 (Uni), 2 (Bi), 0 (Multipoint),
2
> > (Gateway)
> > LowLine LowVPI LowVCI HiLine HiVPI HiVCI TrfType CONNECTION
> > 0 0 5 16 0 2 UBR-BE Gateway
> > 0 0 16 16 0 3 UBR-BE Gateway
> > 0 0 32 2 0 32 UBR-BE Bi
> > 0 0 100 2 0 101 VBR-GS Bi
> >
> > LS100#show pvc 2
> > Bandwidth Available (Forward/Backward/Line Rate): 0.0 / 0.0 /
155.0
> Mbps
> > Existing connections : 0 (Uni), 2 (Bi), 0 (Multipoint),
2
> > (Gateway)
> > LowLine LowVPI LowVCI HiLine HiVPI HiVCI TrfType CONNECTION
> > 2 0 5 16 0 2 UBR-BE Gateway
> > 2 0 16 16 0 3 UBR-BE Gateway
> > 2 0 32 0 0 32 UBR-BE Bi
> > 2 0 101 0 0 100 VBR-GS Bi
> >
> > LS100#show route
> > Destination Type Primary VPI
Secondary
> > VPI
> > 4700010001 0001000100 0100001110 1110111000 NSAP * 0 10
0
> > 200
> > 4700020002 0002000200 0200022220 2220222000 NSAP * 2 10
2
> > 200
> >
> > LS100#show line
> > Line 0 :(GOOD)
> > Line 1 :(NA)
> > Line 2 :(GOOD)
> > Line 3 :(NA)
> > Line 4 :(Loss of Signal)
> > Line 5 :(NA)
> > Line 6 :(Loss of Signal)
> > Line 7 :(NA)
> > Line 8 :(NA)
> > Line 9 :(NA)
> > Line 10:(NA)
> > Line 11:(NA)
> > Line 12:(NA)
> > Line 13:(NA)
> > Line 14:(NA)
> > Line 15:(NA)
> >
> > LS100#
> >
> >
> > ======================
> >
> > Output of debug atm sig-all on r6
> >
> > r6#
> > 00:14:02: ATMSIG(ATM0 0,0 - 0014/00): (vcnum:0) API -
alloc_connection_id
> E
> > 00:14:02:
> > ATMAPI: (c->s): SETUPv2 ci: 0xE mp: 0 ei: 0xFFFFFFFF
> > 00:14:02: ATMSIG: Called len 20
> > 00:14:02: ATMSIG: Calling len 20
> > 00:14:02: ATMSIG(ATM0 0,0 - 0014/00): (vcnum:0) build Setup msg,
Null(U0)
> > state
> > 00:14:02: ATMSIG(ATM0 0,0 - 0014/00): (vcnum:0) API - from
sig-client
> > ATM_OWNER_SMAP
> > 00:14:02: ATMSIG(ATM0 0,0 - 0014/00): (vcnum:16) Input event : Req
Setup
> in
> > Null(U0)
> > 00:14:02: ATMSIG(ATM0 0,0 - 0014/00): (vcnum:16) Output Setup
> > msg(XferAndTx), Null(U0) state
> > 00:14:02: ATMSIG: Called Party Addr:
> > 47.000200020002000200020002.222022202220.00
> > r6#
> > 00:14:02: ATMSIG: Calling Party Addr:
> > 47.000100010001000100010001.111011101110.00
> > 00:14:02: ATMSIG(ATM0 0,0 - 0014/00): (vcnum:16) Null(U0) -> Call
> > Initiated(U1)
> > 00:14:02: E164 NOT Converted
> > 00:14:02: ATMSIG(ATM0 0,0 - 0014/00): (vcnum:16) Input event : Rcvd
> Release
> > Complete in Call Initiated(U1)
> > 00:14:02: ATMSIG(ATM0 0,0 - 0014/00): (vcnum:16)cause = Invalid,
location
> =
> > User
> > 00:14:02: ATMSIG(ATM0 0,0 - 0014/00): (vcnum:16) Call Initiated(U1)
->
> > Null(U0)
> > 00:14:02: ATMSIG(ATM0 0,0 - 0014/00): (vcnum:16) API - notifying
Release
> > Complete event to client ATM0.1
> > 00:14:02:
> > ATMAPI: (c<-s): RELEASE_COMPv2 ci: 0xE cause: 0x7A
> > r6#
> > 00:15:02: ATMSIG(ATM0 0,0 - 0015/00): (vcnum:0) API -
alloc_connection_id
> F
> > 00:15:02:
> > ATMAPI: (c->s): SETUPv2 ci: 0xF mp: 0 ei: 0xFFFFFFFF
> > 00:15:02: ATMSIG: Called len 20
> > 00:15:02: ATMSIG: Calling len 20
> > 00:15:02: ATMSIG(ATM0 0,0 - 0015/00): (vcnum:0) build Setup msg,
Null(U0)
> > state
> > 00:15:02: ATMSIG(ATM0 0,0 - 0015/00): (vcnum:0) API - from
sig-client
> > ATM_OWNER_SMAP
> > 00:15:02: ATMSIG(ATM0 0,0 - 0015/00): (vcnum:17) Input event : Req
Setup
> in
> > Null(U0)
> > 00:15:02: ATMSIG(ATM0 0,0 - 0015/00): (vcnum:17) Output Setup
> > msg(XferAndTx), Null(U0) state
> > 00:15:02: ATMSIG: Called Party Addr:
> > 47.000200020002000200020002.222022202220.00
> > r6#
> > 00:15:02: ATMSIG: Calling Party Addr:
> > 47.000100010001000100010001.111011101110.00
> > 00:15:02: ATMSIG(ATM0 0,0 - 0015/00): (vcnum:17) Null(U0) -> Call
> > Initiated(U1)
> > 00:15:02: E164 NOT Converted
> > 00:15:02: ATMSIG(ATM0 0,0 - 0015/00): (vcnum:17) Input event : Rcvd
> Release
> > Complete in Call Initiated(U1)
> > 00:15:02: ATMSIG(ATM0 0,0 - 0015/00): (vcnum:17)cause = Invalid,
location
> =
> > User
> > 00:15:02: ATMSIG(ATM0 0,0 - 0015/00): (vcnum:17) Call Initiated(U1)
->
> > Null(U0)
> > 00:15:02: ATMSIG(ATM0 0,0 - 0015/00): (vcnum:17) API - notifying
Release
> > Complete event to client ATM0.1
> > 00:15:02:
> > ATMAPI: (c<-s): RELEASE_COMPv2 ci: 0xF cause: 0x7A
> > r6#
> >
> > ==============
> >
> > Output of debug atm sig-all on r9
> >
> >
> > r6#
> > 00:14:02: ATMSIG(ATM0 0,0 - 0014/00): (vcnum:0) API -
alloc_connection_id
> E
> > 00:14:02:
> > ATMAPI: (c->s): SETUPv2 ci: 0xE mp: 0 ei: 0xFFFFFFFF
> > 00:14:02: ATMSIG: Called len 20
> > 00:14:02: ATMSIG: Calling len 20
> > 00:14:02: ATMSIG(ATM0 0,0 - 0014/00): (vcnum:0) build Setup msg,
Null(U0)
> > state
> > 00:14:02: ATMSIG(ATM0 0,0 - 0014/00): (vcnum:0) API - from
sig-client
> > ATM_OWNER_SMAP
> > 00:14:02: ATMSIG(ATM0 0,0 - 0014/00): (vcnum:16) Input event : Req
Setup
> in
> > Null(U0)
> > 00:14:02: ATMSIG(ATM0 0,0 - 0014/00): (vcnum:16) Output Setup
> > msg(XferAndTx), Null(U0) state
> > 00:14:02: ATMSIG: Called Party Addr:
> > 47.000200020002000200020002.222022202220.00
> > r6#
> > 00:14:02: ATMSIG: Calling Party Addr:
> > 47.000100010001000100010001.111011101110.00
> > 00:14:02: ATMSIG(ATM0 0,0 - 0014/00): (vcnum:16) Null(U0) -> Call
> > Initiated(U1)
> > 00:14:02: E164 NOT Converted
> > 00:14:02: ATMSIG(ATM0 0,0 - 0014/00): (vcnum:16) Input event : Rcvd
> Release
> > Complete in Call Initiated(U1)
> > 00:14:02: ATMSIG(ATM0 0,0 - 0014/00): (vcnum:16)cause = Invalid,
location
> =
> > User
> > 00:14:02: ATMSIG(ATM0 0,0 - 0014/00): (vcnum:16) Call Initiated(U1)
->
> > Null(U0)
> > 00:14:02: ATMSIG(ATM0 0,0 - 0014/00): (vcnum:16) API - notifying
Release
> > Complete event to client ATM0.1
> > 00:14:02:
> > ATMAPI: (c<-s): RELEASE_COMPv2 ci: 0xE cause: 0x7A
> > r6#
> > 00:15:02: ATMSIG(ATM0 0,0 - 0015/00): (vcnum:0) API -
alloc_connection_id
> F
> > 00:15:02:
> > ATMAPI: (c->s): SETUPv2 ci: 0xF mp: 0 ei: 0xFFFFFFFF
> > 00:15:02: ATMSIG: Called len 20
> > 00:15:02: ATMSIG: Calling len 20
> > 00:15:02: ATMSIG(ATM0 0,0 - 0015/00): (vcnum:0) build Setup msg,
Null(U0)
> > state
> > 00:15:02: ATMSIG(ATM0 0,0 - 0015/00): (vcnum:0) API - from
sig-client
> > ATM_OWNER_SMAP
> > 00:15:02: ATMSIG(ATM0 0,0 - 0015/00): (vcnum:17) Input event : Req
Setup
> in
> > Null(U0)
> > 00:15:02: ATMSIG(ATM0 0,0 - 0015/00): (vcnum:17) Output Setup
> > msg(XferAndTx), Null(U0) state
> > 00:15:02: ATMSIG: Called Party Addr:
> > 47.000200020002000200020002.222022202220.00
> > r6#
> > 00:15:02: ATMSIG: Calling Party Addr:
> > 47.000100010001000100010001.111011101110.00
> > 00:15:02: ATMSIG(ATM0 0,0 - 0015/00): (vcnum:17) Null(U0) -> Call
> > Initiated(U1)
> > 00:15:02: E164 NOT Converted
> > 00:15:02: ATMSIG(ATM0 0,0 - 0015/00): (vcnum:17) Input event : Rcvd
> Release
> > Complete in Call Initiated(U1)
> > 00:15:02: ATMSIG(ATM0 0,0 - 0015/00): (vcnum:17)cause = Invalid,
location
> =
> > User
> > 00:15:02: ATMSIG(ATM0 0,0 - 0015/00): (vcnum:17) Call Initiated(U1)
->
> > Null(U0)
> > 00:15:02: ATMSIG(ATM0 0,0 - 0015/00): (vcnum:17) API - notifying
Release
> > Complete event to client ATM0.1
> > 00:15:02:
> > ATMAPI: (c<-s): RELEASE_COMPv2 ci: 0xF cause: 0x7A
> > r6#
This archive was generated by hypermail 2.1.4 : Sat Apr 05 2003 - 08:51:34 GMT-3