From: KK Fok (rgb98a@hotmail.com)
Date: Fri Mar 07 2003 - 09:44:48 GMT-3
Thank you guys.
I'm eager to learn of the result.
By the way, does anyone know where I can obtain a soft copy of the CCIE
logo. Did a bit of seaching at Cisco today but without any success.
>From: "Larry Letterman" <lletterm@cisco.com>
>Reply-To: "Larry Letterman" <lletterm@cisco.com>
>To: "Raj Bahad" <raj.bahad@totalise.co.uk>, <ccielab@groupstudy.com>
>Subject: Re: NM-16ESW
>Date: Fri, 7 Mar 2003 01:40:01 -0800
>
>I'll try it in the morning..I'll take out one of the switch
>modules and put it in the 2nd 3745..I'll try hsrp and see what it does..
>
>Larry Letterman
>Network Engineer
>Cisco Systems
>
>
> ----- Original Message -----
> From: Raj Bahad
> To: Larry Letterman ; ccielab@groupstudy.com
> Sent: Friday, March 07, 2003 1:43 AM
> Subject: RE: NM-16ESW
>
>
> Larry,
>
> Thanks for your input!
>
> This may sound like a silly question, but can you confirm that the layer
>3
> routed interface (EtherSwitch Module) includes features like NAT, HSRP
>and
> Queuing.
>
> I'm assuming the answer will be yes!
>
> Again, thanks for your help!
>
> Cheers,
>
> Raj
> CCIE #10256
> Network Consultant
> European Space Agency
>
> >===== Original Message From "Larry Letterman" <lletterm@cisco.com>
>=====
> >I just started playing with my 3745 today. It has 2 32 port ethernet
>switch
> >modules, 2 fast ethernet interfaces and 2 gig ports on one of the 32 NM
> >modules. I verified that I can in fact set up an Ip address on any of
>the
> >ethernet ports and use them as a layer 2 or 3 routed interface.
> >
> >Larry Letterman
> >Network Engineer
> >Cisco Systems
> >
> >
> > ----- Original Message -----
> > From: Sandeep Lugani
> > To: KK Fok ; ccielab@groupstudy.com
> > Sent: Thursday, March 06, 2003 7:52 PM
> > Subject: RE: NM-16ESW
> >
> >
> > We have used in several implementation. In NM16ESW, FE ports are not
>routed
> >ports. They are switch ports only. Only good thing that switch and
>router
>are
> >connected internally.
> >
> > > Thanks and Regards
> > >
> > > Sandeep Lugani
> > > CCIE 6691, Technical Specialist
> > > Wipro Infotech Mobile : 9810775057
> > > Thapar House Fax : 91- 11-3362145
> > > 124, Janpath E-Mail :
>sandeep.lugani@wipro.co.in
> > > New Delhi - 110 001 Web : www.wipro.co.in
> > >
> >
> >
> > -----Original Message-----
> > From: KK Fok [mailto:rgb98a@hotmail.com]
> > Sent: Thursday, March 06, 2003 5:21 PM
> > To: ccielab@groupstudy.com
> > Subject: NM-16ESW
> >
> >
> > Hi Group,
> >
> > Has anyone played with this NM-16ESW? Can I treat indiviudal ports as
> routed
> > interface and do NAT, apply access list, etc?
> >
> > Thanks in advance for your help.
> >
> >
> >
> >
> >
> >
> >
> > _________________________________________________________________
> > STOP MORE SPAM with the new MSN 8 and get 2 months FREE*
> > http://join.msn.com/?page=features/junkmail
> >
> > DISCLAIMER:
> > Information contained and transmitted by this E-MAIL is proprietary
>to
> > Wipro Limited and is intended for use only by the individual or
>entity
> > to which it is addressed, and may contain information that is
>privileged,
> > confidential or exempt from disclosure under applicable law. If this
>is
> > a forwarded message, the content of this E-MAIL may not have been
>sent
> > with the authority of the Company. If you are not the intended
>recipient,
> > an agent of the intended recipient or a person responsible for
>delivering
> > the information to the named recipient, you are notified that any
>use,
> > distribution, transmission, printing, copying or dissemination of
>this
> > information in any way or in any manner is strictly prohibited. If
>you
>have
> > received this communication in error, please delete this mail &
>notify
>us
> > immediately at mailadmin@wipro.co.in
This archive was generated by hypermail 2.1.4 : Sat Apr 05 2003 - 08:51:34 GMT-3