From: Brian Dennis (brian@labforge.com)
Date: Thu Mar 06 2003 - 17:32:52 GMT-3
Make sure you have "no exec" under the async lines. If you do have "no
exec" configured under the async lines, clear all the lines and then
reconnect.
Brian Dennis, CCIE #2210 (R&S/ISP Dial/Security)
brian@labforge.com
http://www.labforge.com
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Danny Andaluz andaluz
Sent: Thursday, March 06, 2003 10:23 AM
To: ccielab@groupstudy.com
Subject: Access-server problems
I have had an access server for my lab for some time now. While doing
write erases/reload on my routers after a lab, I accidentally did this
on the AS. I put the configuration back exactly as it was and now when
I reverse telnet to one of the lines, I get a flood of garbage
characters. Eventually this stops and I get the router console, but
it's pretty annoying. I am pretty sure I have the correct config since
I copied it from Caslow's book. Any ideas?
TIA,
Danny
This archive was generated by hypermail 2.1.4 : Sat Apr 05 2003 - 08:51:34 GMT-3