Callback from aux port

From: Sam.MicroGate@usa.telekom.de
Date: Wed Mar 05 2003 - 14:27:36 GMT-3

• Next message: Pratt, Jeremy: "RE: At what percentage of T1 utilization you should see"
• Previous message: Gerry Hilton: "Re: Dialer watch - BRI interface won't go down when primary is"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

Hello everyone,

I have difficulty configuring the dial call back from an aux port in a
router. Each time I call my router, and after asking me about the username,
password and the call back number, it disconnects but it never call back.
Here is my router config. Thanks for your help.

version 12.2

service exec-callback
username elsayedmcb callback-dialstring "" password 0 xxxxxxxx

chat-script offhook "" "ATH1" OK
chat-script rtp ABORT ERROR ABORT BUSY "" "AT" OK "ATDT" \T" TIMEOUT 45
CONNECT \c

line aux 0
 session-timeout 600
 password 7 07072F551F5B4A
 session-disconnect-warning 600 message Session Will Disconnect......
 script modem-off-hook offhook
 script callback rtp
 login local
 modem InOut
 transport preferred telnet
 transport input all
 transport output telnet
 callback forced-wait 5
 speed 38400

Sam

• Next message: Pratt, Jeremy: "RE: At what percentage of T1 utilization you should see"
• Previous message: Gerry Hilton: "Re: Dialer watch - BRI interface won't go down when primary is"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Sat Apr 05 2003 - 08:51:32 GMT-3