Re: Distance value of connected routes

From: Ram Shummoogum (rshummoo@ca.ibm.com)
Date: Wed Mar 05 2003 - 13:26:21 GMT-3

• Next message: Gerry Hilton: "Re: Dialer watch - BRI interface won't go down when primary is"
• Previous message: Tim Fletcher: "Re: ISIS tags"
• Maybe in reply to: Ciscolab: "Distance value of connected routes"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

ip route 10.1.1.0 255.255.255.0 ser 0 20

Routing entry for 10.1.1.0/24
  Known via "static", distance 20, metric 0 (connected)
  Routing Descriptor Blocks:
  * directly connected, via Serial0
      Route metric is 0, traffic share count is 1

RAM

"Ciscolab" <ciscolab@vip.sina.com>@groupstudy.com on 03/05/2003 09:06:51 AM

Please respond to "Ciscolab" <ciscolab@vip.sina.com>

Sent by: nobody@groupstudy.com

To: "ccielab@groupstudy.com" <ccielab@groupstudy.com>
cc:
Subject: Distance value of connected routes

Hello, All Friends,

Is there any way to modify the distance value for connected routes?

             Thanks for your help

!!!!!!!!!!!!!!!!Ciscolab
!!!!!!!!!!!!!!!!ciscolab@vip.sina.com
!!!!!!!!!!!!!!!!!!!!2003-03-05

• Next message: Gerry Hilton: "Re: Dialer watch - BRI interface won't go down when primary is"
• Previous message: Tim Fletcher: "Re: ISIS tags"
• Maybe in reply to: Ciscolab: "Distance value of connected routes"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Sat Apr 05 2003 - 08:51:32 GMT-3