From: Brian Dennis (brian@5g.net)
Date: Wed Mar 05 2003 - 03:30:12 GMT-3
The "ip local policy" global command "policy routes" packets sourced by
the router. The "ip policy" interface command "policy routes" packets
incoming on the interface.
Brian Dennis, CCIE #2210 (R&S/ISP Dial/Security)
brian@labforge.com
http://www.labforge.com
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Tom Young
Sent: Tuesday, March 04, 2003 7:38 PM
To: ccielab@groupstudy.com
Subject: route-map
HI, group
In the following sample, the policy-routing was defined
twice times.
In the interface mode:
ip policy route-map 10
and in the globe mode:
ip local policy route-map 10
How about the diffrence with two commands, which one could
be omitted ?
Thanks alot
Current configuration:
!
version 11.3
service timestamps debug uptime
service timestamps log uptime
no service password-encryption
!
hostname r3
!
!
!
!
!
!
process-max-time 200
!
interface Ethernet0
no ip address
shutdown
!
interface Serial0
ip address 10.34.1.1 255.255.0.0
no ip mroute-cache
ip policy route-map 10
no fair-queue
!
interface Serial1
ip address 10.10.1.3 255.255.0.0
encapsulation frame-relay
ip ospf priority 0
ip policy route-map 10
clockrate 64000
frame-relay map ip 10.10.1.1 301 broadcast
!
interface TokenRing0
no ip address
shutdown
!
router ospf 1
network 10.10.1.3 0.0.0.0 area 0
network 10.34.1.1 0.0.0.0 area 3
area 3 virtual-link 10.44.2.1
!
ip local policy route-map 10
ip classless
!
access-list 101 permit ip any 137.20.20.0 0.0.0.255
access-list 101 permit ip any host 10.10.1.2
access-list 101 permit ip any 11.0.0.0 0.255.255.255
access-list 101 permit ip any host 10.10.1.5
route-map 10 permit 10
match ip address 101
set ip next-hop 10.10.1.1
!
!
!
line con 0
line aux 0
line vty 0 4
login
!
end
This archive was generated by hypermail 2.1.4 : Sat Apr 05 2003 - 08:51:32 GMT-3