RE: Exclude address range from NAT pool (Solved)

From: Cezar Fistik (cfistik@moldovacc.md)
Date: Tue Mar 04 2003 - 23:14:55 GMT-3

• Next message: Henry Jiang: "Re: Dialer watch - BRI interface won't go down when primary is"
• Previous message: tan: "RE: Checking Route Table in the Backbone"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

Hi everybody,

Thanks for your help. Just wanted to say that this question is solved.
Brian answered it impecably. This was exactly what I meant. Sorry for any
confusion this question created.

So, the solution is:

ip nat pool MyPool netmask 255.255.255.0
 address 192.168.1.1 192.168.1.19
 address 192.168.1.41 192.168.1.254

Thanks and regards,
Cezar Fistik

>
> How can I specify a NAT pool with some addresses excluded from this pool
> Ex. Assign subnet 192.168.1.0/24 for NAT translations with the exception
> of 192.168.1.20 - 192.168.1.40 addresses.
>
> Thanks
> Cezar Fistik

• Next message: Henry Jiang: "Re: Dialer watch - BRI interface won't go down when primary is"
• Previous message: tan: "RE: Checking Route Table in the Backbone"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Sat Apr 05 2003 - 08:51:32 GMT-3