RE: Exclude address range from NAT pool

From: Brian Dennis (brian@labforge.com)
Date: Tue Mar 04 2003 - 18:25:01 GMT-3

• Next message: kasturi cisco: "Re: Dialer watch - BRI interface won't go down when primary is"
• Previous message: stefan vogt: "Re: Just want confirm this match requirement"
• Maybe in reply to: Cezar Fistik: "Exclude address range from NAT pool"
• Next in thread: Mike Williams: "RE: Exclude address range from NAT pool"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

ip nat pool myPool netmask 255.255.255.0
 address 192.168.1.1 192.168.1.19
 address 192.168.1.41 192.168.1.254

Brian Dennis, CCIE #2210 (R&S/ISP Dial/Security)
brian@labforge.com
http://www.labforge.com

-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Cezar Fistik
Sent: Tuesday, March 04, 2003 12:27 PM
To: ccielab@groupstudy.com
Subject: Exclude address range from NAT pool

Hi group,

How can I specify a NAT pool with some addresses excluded from this pool
Ex. Assign subnet 192.168.1.0/24 for NAT translations with the exception
of
192.168.1.20 - 192.168.1.40 addresses.

Thanks
Cezar Fistik

• Next message: kasturi cisco: "Re: Dialer watch - BRI interface won't go down when primary is"
• Previous message: stefan vogt: "Re: Just want confirm this match requirement"
• Maybe in reply to: Cezar Fistik: "Exclude address range from NAT pool"
• Next in thread: Mike Williams: "RE: Exclude address range from NAT pool"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Sat Apr 05 2003 - 08:51:32 GMT-3