From: Alexander Arsenyev (ETL) (Alexander.Arsenyev@etl.ericsson.se)
Date: Tue Mar 04 2003 - 06:48:44 GMT-3
Hello, Brian,
Would You please share example config for making 2 routers connected back-to-back via AUX
ports to appear as one big FR switch? On CCO I could find example for PPP only.
Thanks & regards
Alex
-----Original Message-----
From: Brian Dennis [mailto:brian@labforge.com]
Sent: 26 February 2003 20:54
To: 'Darvin'; ccielab@groupstudy.com
Subject: RE: token ring
You can actually just connect them together via their AUX ports and make
them appear as one big Frame-Relay switch. If you need an example config
let me know.
Brian Dennis, CCIE #2210 (R&S/ISP Dial/Security)
brian@labforge.com
http://www.labforge.com
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Darvin
Sent: Wednesday, February 26, 2003 12:05 PM
To: ccielab@groupstudy.com
Subject: token ring
hi group
i have cisco 2600 series router with a token ring port with 4 wic
interfaces which i am using as my frame realy switch i just purchased a
token ring 2500 terminal server which has a 1 token ring port and 2
serial
interfaces. I've looked in archives but cant see anything relevant.
I am looking to find out can i use cross over cable to link my 2 token
ring
routers together back to back, so i can create a tunnel and use the 2500
terminal server serial lines as an addition to my 2600 4 wic interface
router for bigger frame relay network yippee.
if not has anyone got 4 port or 8 port rj45 token ring hub for sale.
that
for the old ccies
many thanks
This archive was generated by hypermail 2.1.4 : Sat Apr 05 2003 - 08:51:31 GMT-3