From: Jerry (phase90@comcast.net)
Date: Mon Mar 03 2003 - 20:53:44 GMT-3
Hello group,
As a follow-up on the same topic, I have a PIX 525 with
inside and outside interface Gigabit. The DMZ interfaces are 100Mg
Fastethernets. The question is this: Can I bring my WAN
demarcation box's fastethernet into 1 of the DMZ FEs or must I change the
outside Gigabit E into
a Fastethernet in order to keep the security levels all the same? In other
words can I change the PIX
config on 1 of my FE ports to be equivalent to what my outside interface is?
Jerry
----- Original Message -----
From: groupstudy <groupstudy@thenooch.com>
To: Mohammed Al-zubi <mohammed@sulafsolutions.com>; <ccielab@groupstudy.com>
Sent: Monday, March 03, 2003 4:37 PM
Subject: RE: PIX 520 4FE cards
> I know if you build a clone these nics will work so I don't see any reason
why they wouldn't work in the original 520..
> Quite obviously unsupported... ;)
> Intel 82557/82558/82559 Intel NICs
> check out
> http://orbital.wiretapped.net/~pleb/routermonkey/
>
> -----Original Message-----
> From: Mohammed Al-zubi [mailto:mohammed@sulafsolutions.com]
> Sent: Monday, March 03, 2003 1:02 PM
> To: ccielab@groupstudy.com
> Subject: PIX 520 4FE cards
>
>
> Hello group,
> I hope one of you knows the answer to this one. Since the PIX 520 is
> essentially a PC, can we add any 4-port FE card to it? if not, is there
an
> acceptable manufacture list that it takes. we currently have a PIX that
has
> 2 ports only. we want to simulate DMZs
>
> Thanks,
> Mohammed.
>
> <><><><><><><><><><><><><><><><><><><><>
> Mohammed Al-Zubi
> VP Professional Services
> 24 Werner Ave. #21
> Daly City, CA 94014
> Tel: (650) 438-6384
> Fax: (720) 293-4897
> Web: <http://www.sulafsolutions.com/>
This archive was generated by hypermail 2.1.4 : Sat Apr 05 2003 - 08:51:31 GMT-3