From: Tim Fletcher (tim@fletchmail.net)
Date: Fri Feb 28 2003 - 11:18:41 GMT-3
Vickie,
Without an IP address, R2 won't be able to ping anything.
-Tim Fletcher
At 06:35 PM 2/28/2003 +0800, Vickie Choy wrote:
>Hi all,
> -------------------------------
>R4-------| port 4 port 2 |-----------R2
> | 3550 |
>R6-------| port 6 |
> -----------------------------------
>
>Port 4 and port 6 belong to the same vlan vlan 10. Port 2 belong to
>default vlan. Port 4 and 6 belong to the subnet 140.10.1.0/24, R4 has
>140.10.1.4/24 and R6 has 140.10.1.6/24 on the Ethernet interface. R2
>has no IP address on the interface.
>
>Question is to create a command interface 140.10.1.7 on 3550 so that R2,
>R4 and R6 be able to ping to that interface.
>
>If I create a SVI "int vlan 10" with ip address 140.10.1.7 only R4 and
>R6 can ping. If I configure an ip address say 140.11.12/24 on the
>interface of R2, but is not allowed to configured a static route on R2
>to point to the 140.10.1.0/24 subnet. How to get R6 to be able to ping
>to the command interface?
>
>Appreciate your input.
>
>Thanks
>
>Vickie
This archive was generated by hypermail 2.1.4 : Sat Mar 01 2003 - 11:06:39 GMT-3