From: Frank Jimenez (franjime@cisco.com)
Date: Thu Feb 27 2003 - 17:54:45 GMT-3
This is a pretty comprehensive list of what works in which of those platforms.
(Watch the Word Wrap)
http://www.cisco.com/en/US/partner/products/hw/modules/ps3129/products_tech_note
09186a00800ae37f.shtml
Good Luck!
Frank Jimenez, CCIE #5738
Cisco Systems, Inc.
franjime@cisco.com
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
ccie@rivancitadel.com
Sent: Thursday, February 27, 2003 12:01 PM
To: 'Michael J. Doherty'; 'Chuck Church'; 'Darvin'; ccielab@groupstudy.com
Subject: RE: 1fe2w
That isn't exactly correct. I have a 2621 with a NM-1FE-TX in it and running
fine. I haven't been able to get the NM-1FE-2CT1-CSU to run in any of my 2600's
though.
Russ
Russell A. Nelson, CISSP, CCDP, CCNP, CCDA, CCNA, MCSE
Senior Data Architect/Lead Network Engineer
Trinnix, LLC.
Office: 919.367.9915
Cell: 919.412.6111
Email: ranelson@trinnix.com
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of Michael
J. Doherty
Sent: Thursday, February 27, 2003 11:25 AM
To: Chuck Church; Darvin; ccielab@groupstudy.com
Subject: Re: 1fe2w
The card is not supported in the 26xx series...the 26xx can only support two FE
interfaces, and only if they are hardwired to the board, it does not support any
of the FE NMs.
HTH
Mike
----- Original Message -----
From: "Chuck Church" <ccie8776@rochester.rr.com>
To: "Darvin" <darvin@blueyonder.co.uk>; <ccielab@groupstudy.com>
Sent: Thursday, February 27, 2003 10:06
Subject: Re: 1fe2w
> Darvin,
>
> Did you go through the Software Advisor to match your hardware to
an
> image? 12.2 mainline should support that card, however. Are you sure
that
> card is in slot 1? Here's the link for the SW Advisor. Are you sure
that
> card is supported in the 2600 and 3620?
> http://www.cisco.com/cgi-bin/Support/CompNav/Index.pl
>
> Chuck Church
> CCIE #8776, MCNE, MCSE
>
>
> ----- Original Message -----
> From: "Darvin" <darvin@blueyonder.co.uk>
> To: <ccielab@groupstudy.com>
> Sent: Thursday, February 27, 2003 7:47 AM
> Subject: 1fe2w
>
>
> > hi group again
> >
> > i got another issus with nm1fe2w this was taken out of cisco 3640.
> putting
> > it in cisco 2600 aND 3620 and blasted things are not being
recognised by
> the
> > ios images put in 12.2 enterprise, ip only, ip and still not working
i
> > getting this again 00:00:05: %PA-2-UNDEFPA: Undefined Port Adaptor
type
> 215
> > in bay 1
> >
> > any ideas
--- Incoming mail is certified Virus Free. Checked by AVG anti-virus system (http://www.grisoft.com). Version: 6.0.456 / Virus Database: 256 - Release Date: 2/18/2003--- Outgoing mail is certified Virus Free. Checked by AVG anti-virus system (http://www.grisoft.com). Version: 6.0.456 / Virus Database: 256 - Release Date: 2/18/2003
This archive was generated by hypermail 2.1.4 : Sat Mar 01 2003 - 11:06:38 GMT-3