From: iron_tri (iron_tri@msn.com)
Date: Wed Feb 26 2003 - 15:48:50 GMT-3
If you don't configure the port as a trunk, using the newer option for
connecting a phone, then you should specify the access vlan number just in
case you don't plug in a phone, unless you don't care what vlan the port
traffic belongs to on the switch. The port simply won't be in any
particular vlan without this command.
----- Original Message -----
From: "Tim Fletcher" <tim@fletchmail.net>
To: "Ong Boon Hui" <ongbh@cet.st.com.sg>; "Cezar Fistik"
<cfistik@moldovacc.md>; <ccielab@groupstudy.com>
Sent: Wednesday, February 26, 2003 7:57 AM
Subject: Re: voice vlans correct configuration
> What's the purpose of the "switchport access vlan 10"? Since it's in trunk
> mode that should be irrelevant (but harmless).
>
> -Tim Fletcher
>
> At 12:02 PM 2/26/2003 +0800, Ong Boon Hui wrote:
> >Hi,
> >
> >How about the following: -
> >
> >Inferface fa 0/1
> >switchport access vlan 10
> >switchport trunk native vlan 10
> >switchport voice vlan 100
> >switchport trunk encapsulation dot1q
> >switchport mode trunk
> >
> >
> >Debarros
> >
> >
> >
> >----- Original Message -----
> >From: "Cezar Fistik" <cfistik@moldovacc.md>
> >To: <ccielab@groupstudy.com>
> >Sent: Wednesday, February 26, 2003 10:57 AM
> >Subject: voice vlans correct configuration
> >
> >
> > > Hi group,
> > >
> > > Could you please, share your ideas about the following configurations.
> >Just
> > > assume that an ip phone is connected to int fast 0/10 and to the
phone is
> > > connected a pc that is supposed to be in vlan 10
> > >
> > > 1.
> > > mls qos
> > > !
> > > interface fastethernet 0/10
> > > switchport mode access
> > > switchport access vlan 10
> > > switchport voice vlan 100
> > > mls qos trust cos
> > >
> > > 2.
> > > mls qos
> > > !
> > > interface fastethernet 0/10
> > > switchport mode trunk
> > > switchport trunk encapsulation dot1q
> > > switchport voice vlan 100
> > > mls qos trust cos
> > >
> > > Which one do you think is correct? Or if they are both incorect I'll
> > > appreciate any advice.
> > >
> > > Thanks,
> > > Cezar Fistik
This archive was generated by hypermail 2.1.4 : Sat Mar 01 2003 - 11:06:37 GMT-3