From: Copleston Daniel (Daniel.Copleston@ukomfs.com)
Date: Wed Feb 26 2003 - 08:33:46 GMT-3
Depending on the telnet client you use you will be able to specify command
scripts to run on connection. These scripts are then used to execute the
command to do the relevant reverse telnet. Searching the web for telnet /
scripts etc. should reveal a whole host of clients you can use. The CRT and
SecureCRT products from Vandyke Software http://www.vandyke.com/download/
are pretty good (but not free).
Thanks,
Daniel
-----Original Message-----
From: FATHALLAH [mailto:sfathallah@mail.cbi.net.ma]
Sent: 26 February 2003 09:11
To: Ccielab
Subject: same as the ccie envirenement
Hi Group,
Can some one please tell me how can I access to different routers of my LAB
By simple click to windows icon.
I have Cisco 2511RJ configured with reverse telnet, and I can get access to
all router, but I have to enter to the 2511 first then tape the name of the
router.
Thanks
Said
************************************************************************
The contents of this message and any attachments are confidential and
are intended solely for the attention and use of the addressee only.
Information contained in this message may be subject to legal,
professional or other privilege or may otherwise be protected by other
legal rules. This message should not be copied or forwarded to any other
person without the express permission of the sender. If you are not the
intended recipient you are not authorised to disclose, copy, distribute
or retain this message or any part of it.
If you have received this message in error, please notify the sender by
telephone (+44-20-7002-4000) and destroy the original message.
We reserve the right to monitor all e-mail messages passing through our
network.
************************************************************************
This archive was generated by hypermail 2.1.4 : Sat Mar 01 2003 - 11:06:36 GMT-3