From: Larry Letterman (lletterm@cisco.com)
Date: Wed Feb 26 2003 - 03:17:51 GMT-3
Ong's version is correct..Thats how we set it up here and it
works fine..
Larry Letterman
Network Engineer
Cisco Systems
----- Original Message -----
From: "Ong Boon Hui" <ongbh@cet.st.com.sg>
To: "Cezar Fistik" <cfistik@moldovacc.md>;
<ccielab@groupstudy.com>
Sent: Tuesday, February 25, 2003 8:02 PM
Subject: Re: voice vlans correct configuration
> Hi,
>
> How about the following: -
>
> Inferface fa 0/1
> switchport access vlan 10
> switchport trunk native vlan 10
> switchport voice vlan 100
> switchport trunk encapsulation dot1q
> switchport mode trunk
>
>
> Debarros
>
>
>
> ----- Original Message -----
> From: "Cezar Fistik" <cfistik@moldovacc.md>
> To: <ccielab@groupstudy.com>
> Sent: Wednesday, February 26, 2003 10:57 AM
> Subject: voice vlans correct configuration
>
>
> > Hi group,
> >
> > Could you please, share your ideas about the following
configurations.
> Just
> > assume that an ip phone is connected to int fast 0/10
and to the phone is
> > connected a pc that is supposed to be in vlan 10
> >
> > 1.
> > mls qos
> > !
> > interface fastethernet 0/10
> > switchport mode access
> > switchport access vlan 10
> > switchport voice vlan 100
> > mls qos trust cos
> >
> > 2.
> > mls qos
> > !
> > interface fastethernet 0/10
> > switchport mode trunk
> > switchport trunk encapsulation dot1q
> > switchport voice vlan 100
> > mls qos trust cos
> >
> > Which one do you think is correct? Or if they are both
incorect I'll
> > appreciate any advice.
> >
> > Thanks,
> > Cezar Fistik
This archive was generated by hypermail 2.1.4 : Sat Mar 01 2003 - 11:06:35 GMT-3