RE: Cisco 7507 Hangs

From: Brian Dennis (brian@labforge.com)
Date: Tue Feb 25 2003 - 22:34:01 GMT-3


What version of IOS are you running? I upgraded a few 7507's (RSP4's)
recently to version 12.1T and run into a critical bug that would crash
the router upon boot-up. I had to move to 12.2 mainline to avoid the
bug.

Brian Dennis, CCIE #2210 (R&S/ISP Dial/Security)
brian@labforge.com
http://www.labforge.com

-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Ben Darji
Sent: Tuesday, February 25, 2003 4:24 PM
To: ccielab@groupstudy.com
Subject: Cisco 7507 Hangs

all, I could use some advice on this one. I have a 7507 box which up to
now has been operating correctly.I recently performed an IOS upgrade
which was succesful. I powered down after about an hours usage, powered
up and the system halts after displaying System Bootstrap
Version......etc, etc.I cannot break and access rommon and have
also tried moving the RSP into the alternative slot, removing and
re-installing the memory simms, etc, etc. There are no other modules
installed in the unit. Any suggestions? Thanks, BD

------------------------------------------------------------------------

Overloaded with spam? With MSN 8 you can filter it out



This archive was generated by hypermail 2.1.4 : Sat Mar 01 2003 - 11:06:35 GMT-3