From: Khalid A. Kaseb (khalid_ameen@rayaintegration.com)
Date: Tue Feb 25 2003 - 12:04:25 GMT-3
Try using route-map subnets permit 10
Match interface loopback X
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Pedro Eira
Sent: Tuesday, February 25, 2003 3:42 PM
To: ccielab@groupstudy.com
Subject: RE: ISIS and OSPF redist
I first tried the isis commands on the interface, since that didn't
work
I did
# redistributed connected route-map subnets
- in OSPF, where the route-map had an acl for the ip on the loopback
address.
>From: "McCallum, Robert" >Reply-To: "McCallum, Robert" >To: "'Pedro
Eira'" , ccielab@groupstudy.com >Subject: RE: ISIS and OSPF redist
>Date:
Mon, 24 Feb 2003 21:26:04 -0000 > >what is the command you are using for
redistributing into isis and ospf. Have you got the keyword subnets on
the redistribution under the router ospf command? > > > -----Original
Message----- > > From: Pedro Eira [mailto:pdaeira@hotmail.com] > > Sent:
24 February 2003 15:35 > > To: ccielab@groupstudy.com > > Subject: ISIS
and OSPF redist > > > > > > Hello, > > > > I try to redistribute Lo 1 on
R2 which is in ISIS(everything > > is L2) into > > OSPF & Lo 0 on R2
which is in OSPF into ISIS, neither of > > those loopbacks > > get
redistributed into the other routing area. > > > > OSPF ISIS > > > >
R1---------R2---------R3 > > > > I've tried to also redistribute
connected, but have been > > unable to get it > > working. > > > > Any
ideas? > > > >
-------------------------------------------------------------- > >
---------- > > > > Add photos to your messages with MSN 8. Get 2 months
FREE*.
------------------------------------------------------------------------
MSN 8 helps ELIMINATE E-MAIL VIRUSES. Get 2 months FREE*.
This archive was generated by hypermail 2.1.4 : Sat Mar 01 2003 - 11:06:34 GMT-3