From: Ong Boon Hui (ongbh@cet.st.com.sg)
Date: Mon Feb 24 2003 - 10:25:38 GMT-3
Hi Group,
A question regarding ATM.
I had tried ATM with ilmi and SVC on same private network prefix. Things work
fine.
Next I tried without ilmi configured on two routers, R8 and R14, ip subnet is
101.1.1.0/24 :-
On R14 : --
interface ATM4/0/0
no ip address
atm ilmi-keepalive
atm ilmi-pvc-discovery
pvc 0/5 qsaal
!
!
interface ATM4/0/0.102 multipoint
ip address 101.1.1.1 255.255.255.0
atm nsap-address 39.03488001BC9000010152D800.111111111111.00
!
svc toR8 nsap 39.03488001BC9000010152D800.222222222222.22
protocol ip 101.1.1.2 broadcast
!
On R8 :-
interface ATM1/0
no ip address
atm uni-version 3.1
atm ilmi-keepalive
atm ilmi-pvc-discovery
pvc 0/5 qsaal
!
!
interface ATM1/0.199 multipoint
ip address 101.1.1.2 255.255.255.0
atm nsap-address 39.03488001BC9000010159C830.222222222222.22
!
svc ToR14 nsap 39.03488001BC9000010159C830.111111111111.00
protocol ip 101.1.1.1 broadcast
Results with "debug atm sig-event " on R14: -
ping 102.1.1.2 ..
00:06:05: ATMSIG: Called len 20
00:06:05: ATMSIG: Calling len 20
00:06:05: ATMSIG(ATM4/0/0 0,0 - 0019/00): (vcnum:0) build Setup msg, Null(U0)
st
ate
00:06:05: ATMSIG(ATM4/0/0 0,0 - 0019/00): (vcnum:0) API - from sig-client
ATM_OW
NER_SMAP
00:06:05: ATMSIG(ATM4/0/0 0,0 - 0019/00): (vcnum:20) Input event : Req Setup
in
Null(U0)
00:06:05: ATMSIG(ATM4/0/0 0,0 - 0019/00): (vcnum:20) Output Setup
msg(XferAndTx)
, Null(U0) state
00:06:05: ATMSIG: Called Party Addr:
39.03488001BC9000010152D800.22222222222
2.22
00:06:05: ATMSIG: Calling Party Addr:
39.03488001BC9000010152D800.11111111111
1.00
00:06:05: ATMSIG(ATM4/0/0 0,0 - 0019/00): (vcnum:20) Null(U0) -> Call
Initiated(
U1)
00:06:05: E164 NOT Converted
00:06:05: ATMSIG(ATM4/0/0 0,0 - 0019/00): (vcnum:20) Input event : Rcvd
Release
Complete in Call Initiated(U1)
00:06:05: ATMSIG(ATM4/0/0 0,0 - 0019/00): (vcnum:20)cause = invalid
information
element contents, location = Private Network, diag1 = 92
00:06:05: ATMSIG(ATM4/0/0 0,0 - 0019/00): (vcnum:20) Call Initiated(U1) ->
Null(
U0)
00:06:05: ATMSIG(ATM4/0/0 0,0 - 0019/00): (vcnum:20) API - notifying Release
Com
plete event to client ATM4/0/0.102.
Success rate is 0 percent (0/5)
R14#
I am beginning to suspect that the configuration would only be valid for nodes
on different network prefix.
Any advice or thoughts appreciated ..
PS: do let me know if I missed out anything in my configurations ..
Debarros
This archive was generated by hypermail 2.1.4 : Sat Mar 01 2003 - 11:06:33 GMT-3