dialer-idle timer and dialer-watch

From: Cezar Fistik (cfistik@moldovacc.md)
Date: Mon Feb 24 2003 - 01:59:01 GMT-3

Hi group,

Accoring to K.Solie's book after dialer-idle timer expires the router
performs a check if the watched routes appear in the routing table through
other interface than bri. If the route is present it brings down the isdn
link if not the idle timer is reset and the link is maintained. In my case
it didn't happen. After idle timer expired the isdn link was just brought
down. The serial interface through which the watched routes were initialy
learned was down and isdn interface was down too. That's all. I didn't
configure an idle timer on bri interfaces. The router used the default. Is
there anything magic that I forgot to do?

Thanks,
Cezar Fistik

This archive was generated by hypermail 2.1.4 : Sat Mar 01 2003 - 11:06:33 GMT-3