From: Joe Martin (jmartin@capitalpremium.net)
Date: Wed Feb 19 2003 - 18:51:11 GMT-3
Try the "dlsw icanreach netbios-name X" and "dlsw icanreach
netbios-exclusive" commands on R2.
HTH,
Joe Martin
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
soon ccie
Sent: Tuesday, February 18, 2003 11:17 PM
To: ccielab@groupstudy.com
Subject: DLSW: allow incoming netbios host X
Hi all,
R1 ------DLSW--------R2.
DLSW peering between R1 (lo0 1.1.1.1) and R2 (lo0 2.2.2.2). R2 can's use
remote-peer command. The task is to let only machine with netbios name X to
come in from R2.
What are the possible solutions? In R1, since it is incoming netbios , so
can't
leverage remote-peer command to apply the filtering because it does only
output
filtering based on the doc. The doc lists one command that may be applied on
R2, but I want confirmation if this is correct or if there is other ways.
R2: dlsw netbios-name X remote-peer 1.1.1.1. (This cmd still use remote-peer
though).
TIA.
This archive was generated by hypermail 2.1.4 : Sat Mar 01 2003 - 11:06:32 GMT-3