From: Scott Livingston (scottl@sprinthosting.net)
Date: Wed Feb 19 2003 - 10:56:22 GMT-3
If you can not use CBWFQ then you might be in for some hurt if they
don't give you the byte size of the protocols. Use the following url
for the procedure if they do give you byte counts.
Go to the 'Custom Queueing' section and look under ' Determining the
Byte Count'
http://www.cisco.com/univercd/cc/td/doc/product/software/ios121/121cgcr/
qos_c/qcprt2/qcdconmg.htm#1001331
scott
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
CCIE FUN
Sent: Tuesday, February 18, 2003 9:37 PM
To: ccielab@groupstudy.com
Subject: Custom Queuing byte count calculation
Hello Group
Can anybody explain the best way to calculate the
byte-count. i am working on a example
"it says that configure custome queueing on frame
cloud so if congestion occurs then:
www traffic gets 50% traffic
FTP /Telnet get 15%
Traffic from e0/0 gets 15%
rest of the traffic shares the remaining bandwidth.
Now how do i determine the byte-count in this case.
I have worked on examples which provide the
predetermined byte-counts, the DOC CD has a nice
example on that.
But have always stumbled upon the kind of examples i
explained above.
any help would be appreciated.
thanks
This archive was generated by hypermail 2.1.4 : Sat Mar 01 2003 - 11:06:32 GMT-3