From: Brian Dennis (brian@labforge.com)
Date: Thu Feb 20 2003 - 03:40:02 GMT-3
This isn't because of discontinuous subnets. This is happening because
you have two Ethernet interfaces running EIGRP on different IP subnets
connected to the same physical network (or VLAN).
Brian Dennis, CCIE #2210 (R&S/ISP Dial/Security)
brian@labforge.com
http://www.labforge.com
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Shawn Yang
Sent: Wednesday, February 19, 2003 9:08 PM
To: 'ccielab@groupstudy.com'
Subject: Suppress EIGRP warning message.
Hi, everyone,
Have you seen eigrp keeps putting the following messages when
there is discontiguous subnets in the network? This message
is just a warning but very annoying. Does anyone know
how to make it disappear?
Thanks for any help!
Shawn
03:31:18: IP-EIGRP: Neighbor 10.1.140.9 not on common subnet for
Ethernet1
(10.1
0.30.2 255.255.255.0)
03:31:32: IP-EIGRP: Neighbor 10.1.140.9 not on common subnet for
Ethernet1
(10.1
0.30.2 255.255.255.0)
03:31:46: IP-EIGRP: Neighbor 10.1.140.9 not on common subnet for
Ethernet1
(10.1
0.30.2 255.255.255.0)
03:32:00: IP-EIGRP: Neighbor 10.1.140.9 not on common subnet for
Ethernet1
(10.1
0.30.2 255.255.255.0)
03:32:13: IP-EIGRP: Neighbor 10.1.140.9 not on common subnet for
Ethernet1
(10.1
0.30.2 255.255.255.0)
This archive was generated by hypermail 2.1.4 : Sat Mar 01 2003 - 11:06:31 GMT-3