From: Tim Fletcher (tim@fletchmail.net)
Date: Wed Feb 19 2003 - 19:43:20 GMT-3
I think this only work on physical lines, not VTYs. Try configuring it on a
physical line, then try making a 2nd connection to the same line.
-Tim Fletcher
At 07:54 PM 2/19/2003 +0100, jfaure@sztele.com wrote:
>Erick:
>
>Do you know some solution to receive a preconfigured "refuse" message if
>all the vty lines are busy in the router wich you are telnetting?
>
>I'm also trying with the global "busy-message" command, but no luck: you
>receive a standard notification, not the message configured.
>
>Regards
>Juan Faure Ferrer
>email: jfaure@sztele.com
>
>Lmnea de Negocio de Telematica y CC
>Ingeniero de Integracisn de Redes y Sistemas
>----------------------------------------------------------------------------
>
>SOLUZIONA TELECOMUNICACIONES
>Servicios Profesionales de UNION FENOSA
>Jerez, 3
>28016 MADRID
>tel 91 579 30 00 fax 91 350 72 83
>---------------------------------------------------------------------------
>
>
>
>
>
> "Erick
> B."
> <erickbe@yahoo Para: jfaure@sztele.com,
>
> .com> ccielab@groupstudy.com
>
> cc:
>
> 19/02/03 06:44 Asunto: Re: REFUSE-MESSAGE
> command
> Por
> favor,
> responda
> a
> erickbe
>
>
>
>
>
>
>
>
>
>I think this is more for TTY lines (reverse telnet,
>etc). When all VTYs are in use the router doesn't have
>a open TCP port to connect to so it doesn't get to a
>connected TCP state.
>
>I do know the refuse-message w/tty does not work as
>documented since 12.0 code. I had this working on some
>term servers at work on old code until a code upgrade.
>
>
>With 12.0, 12.0T, 12.1, 12.1T, 12.2, 12.2T on various
>router and feature sets there is a bug with it that
>hasn't been fixed yet.
>
>With above versions, when you try to access a busy
>line it saids:
>
>Line has invalid autocommand "show
>refuse-message"Connection closed by foreign host
>
>*instead of* the refuse-message defined.
>
>The bug id is CSCdy51736 and is still in new status.
>The bug description is a little off and I've also
>asked it be corrected, and submitted feedback multiple
>times on it as this bug effects a production term
>server environment at work (minor annoyance).
>
>I've inquired about the bug w/TAC a few times but no
>one is assigned to work on it I'm told. Guess it's not
>that big of problem to get fixed. Now that you've
>reminded me I'll open another case on this to see if
>they can fix this.
>
>Erick
>
>--- jfaure@sztele.com wrote:
> > Hi,
> >
> > I'm trying this ios feature. I though if you enable
> > this in the vty line,
> > when the 5 vty connections are busy , you receive
> > the message you put
> > before this command. However, i've tried and at the
> > remote router only
> > appears the standard message informing you that the
> > connection was refused,
> > but no the message you have configured.
> >
> > Am i missing something ?
> >
> > Any help would be apreciated. Regards
>
>
>__________________________________________________
>Do you Yahoo!?
>Yahoo! Shopping - Send Flowers for Valentine's Day
>http://shopping.yahoo.com
This archive was generated by hypermail 2.1.4 : Sat Mar 01 2003 - 11:06:31 GMT-3