From: Khalid A. Kaseb (khalid_ameen@rayaintegration.com)
Date: Thu Feb 20 2003 - 06:50:42 GMT-3
It is better to achieve this using CBWFQ as you can explicit specify
your traffic classes and the percentage of B.W. it may take, then apply
the your policy using service-policy command , here is sample confi.
Class-map match-all dlsw
Match protocol dlsw
Bandwidth-percentage 15
And so on
Correct me if I am wrong
Thanks
Khalid
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
CCIE FUN
Sent: Wednesday, February 19, 2003 5:37 AM
To: ccielab@groupstudy.com
Subject: Custom Queuing byte count calculation
Hello Group
Can anybody explain the best way to calculate the
byte-count. i am working on a example
"it says that configure custome queueing on frame
cloud so if congestion occurs then:
www traffic gets 50% traffic
FTP /Telnet get 15%
Traffic from e0/0 gets 15%
rest of the traffic shares the remaining bandwidth.
Now how do i determine the byte-count in this case.
I have worked on examples which provide the
predetermined byte-counts, the DOC CD has a nice
example on that.
But have always stumbled upon the kind of examples i
explained above.
any help would be appreciated.
thanks
This archive was generated by hypermail 2.1.4 : Sat Mar 01 2003 - 11:06:30 GMT-3