From: Cezar Fistik (cfistik@moldovacc.md)
Date: Wed Feb 19 2003 - 13:09:36 GMT-3
Hi all,
The network is as follows:
3 rouers interconnected through Ethernet. All routers are running RIP1. One
of the routers is also running OSPF on its serial interface which connets
to the rest of the network. All subnets have a /24 mask, including
loopbacks on each router.
The porblem is that it seems that RIP automatically summarises all networks
to class boundary. So when the routers receive routes about loobacks on
other routers it looks just like that:
10.0.0.0/8 ...40.40.40.14 eth 0
40.40.40.13 eth 0
(40.40.40.0/24 is the subnet on ethernet network)
Of course I know that RIP1 is classless, but I also know that it must
assume the subnet mask being the same as the mask on the interface that the
route was received. Am I right?
When I perform redistribution from OSPF, where all routes are with /24 mask
too, the same thing happens. RIP routers receive only calssfull summary of
those routes.
Please, give me a piece of advise regarding this. Is it normal behavior or
I'm getting to tired?
This archive was generated by hypermail 2.1.4 : Sat Mar 01 2003 - 11:06:29 GMT-3