From: kym blair (kymblair@hotmail.com)
Date: Sun Feb 23 2003 - 05:39:48 GMT-3
No problem. No special config required; just program the frame switch as if
that is all it is being used for; just program the routed interfaces and
routing protocol(s) as if that is all they are being used for. Both sides
will work fine. You may have a little trouble viewing "show run". I've
always used my FRS as a "BACKBONE ROUTER" injecting routes to the network
and running either an IGP or eBGP.
HTH, Kym
>From: "Ciscolab" <ciscolab@vip.sina.com>
>Reply-To: "Ciscolab" <ciscolab@vip.sina.com>
>To: "ccielab@groupstudy.com" <ccielab@groupstudy.com>
>Subject: FRAME-RELAY SWITCH
>Date: Sun, 23 Feb 2003 15:14:45 +0800
>
>hello,
>
>Is there any possible that we can use one router as the frame-relay switch
>and a IGP router at same time?
>
>
>thanks
>
>!!!!!!!!!!!!!!!!Ciscolab
>!!!!!!!!!!!!!!!!ciscolab@vip.sina.com
>!!!!!!!!!!!!!!!!!!!!2003-02-23
This archive was generated by hypermail 2.1.4 : Sat Mar 01 2003 - 11:06:29 GMT-3