From: Ouellette, Tim (tim.ouellette@eds.com)
Date: Sat Feb 22 2003 - 04:19:01 GMT-3
Bobby,
For clarification, your watching the routes coming in on the serial link,
when the link goes down and the routes get cleared, the ISDN gets trigger
and connects and you see routes? So far so good.
My first question would be the following. If you see the routes, r5 knows
where to go but is the return path back to r5 known? Can you post the
appropriate portion of your configs.
Tim
-----Original Message-----
From: Bobby [mailto:bobby1@ctimail3.com]
Sent: Friday, February 21, 2003 11:32 PM
To: ccielab@groupstudy.com
Subject: Dialer Watch
Hi,
Need some help on dialer watch. The ISDN connection is between R3 and
R5. I have configured dialer watch on R5. When the serial link of R5 goes
down dialer watch will trigger the isdn line. On R5 I am getting all the
routes etc but I am not able to ping and also if I do sh Int bri 0
it still shows : BRI0 is up, line protocol is up (spoofing).
Thanks
This archive was generated by hypermail 2.1.4 : Sat Mar 01 2003 - 11:06:28 GMT-3