From: cannonr (cannonr@attbi.com)
Date: Sat Feb 22 2003 - 00:30:31 GMT-3
Why is your input queue size set to 500? Isn't the default 75? I would
start by changing the queue size back to default. Also, make sure CEF or
fast switching is enabled. One more thing to point out. Your speed is for
some reason connected at 100/half. Make sure that both the router as well
as the switch are set the same. Preferably 100/full on each side or auto on
each side.
Royce
----- Original Message -----
From: "Charles Huang" <routing@icharles.no-ip.com>
To: "CCIE" <ccielab@groupstudy.com>
Sent: Friday, February 21, 2003 6:05 PM
Subject: Interface Flushes
> Hi All,
>
> I have 701876 flushes on show interface command. Does anyone know what
> 'flushes' mean? Can someone point out a link or explain in detail on what
> does the counter for ? was the packet lost/dropped/forwarded ?
>
> Thanks
> Charles
>
>
>
> FastEthernet0/1 is up, line protocol is up
> Hardware is DEC21140A, address is 0001.c937.1e01 (bia 0001.c937.1e01)
> Internet address is 172.20.49.18/30
> MTU 1500 bytes, BW 10000 Kbit, DLY 1000 usec,
> reliability 255/255, txload 1/255, rxload 10/255
> Encapsulation ARPA, loopback not set
> Keepalive set (10 sec)
> Half-duplex, 100Mb/s, 100BaseTX/FX
> ARP type: ARPA, ARP Timeout 04:00:00
> Last input 00:00:00, output 00:00:03, output hang never
> Last clearing of "show interface" counters 1d02h
> Input queue: 0/500/0/701876 (size/max/drops/flushes); Total output
drops:
> 0
> Queueing strategy: fifo
> Output queue :0/40 (size/max)
> 30 second input rate 426000 bits/sec, 136 packets/sec
> 30 second output rate 0 bits/sec, 0 packets/sec
> 30785609 packets input, 2617627636 bytes
> Received 30785576 broadcasts, 0 runts, 0 giants, 49 throttles
> 0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored
> 0 watchdog
> 0 input packets with dribble condition detected
> 18559 packets output, 1295812 bytes, 0 underruns
> 0 output errors, 38 collisions, 0 interface resets
> 0 babbles, 0 late collision, 0 deferred
> 0 lost carrier, 0 no carrier
> 0 output buffer failures, 0 output buffers swapped out
This archive was generated by hypermail 2.1.4 : Sat Mar 01 2003 - 11:06:28 GMT-3