From: Hai Phung (harryuts@yahoo.com)
Date: Sun Feb 23 2003 - 12:35:00 GMT-3
Policy map only applies to incoming packets to interface. So in this
case, you can not use policy map to set ip precedence for outgoing
traffic.
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Joe Chang
Sent: Sunday, February 23, 2003 1:15 AM
To: Ali Fahmi ; ccielab@groupstudy.com
Subject: Re: WRED
It's interesting that Ali placed the policy map on the egress interface
instead of the ingress. Which would be processed first, policy routing
or
WRED?
----- Original Message -----
From: "Ali Fahmi " <afahmi@plasa.com>
To: <ccielab@groupstudy.com>
Sent: Saturday, February 22, 2003 11:48 AM
Subject: Re: WRED
> Hi,
> Packet must be classified,
> we can use route-map to do that, see config below :
>
>
> access-list 101 permit tcp any any eq ftp
> access-list 102 permit tcp any any eq telnet
> access-list 1 permit any
>
>
> route-map prec permit 10
> match ip address 101
> set ip precedende 1
> route-map prec permit 20
> match ip address 102
> set ip precedence 2
> route-map prec permit 30
> match ip address 1
> set ip precedence 0
>
> int s1
> ip policy-map prec
> random-detect
> random-detect precedence 0 30 60 20
> random-detect precedence 1 10 30 20
> random-detect precedence 2 10 25 20
>
>
>
>
> >From: "pita40" <pita40@hotmail.com>
> >To: <ccielab@groupstudy.com>
> >Sent: Saturday, February 22, 2003 7:48 AM
> >Subject: WRED
> >
> >
> >> I have a question.
> >> I am having difficulty matching WRED traffic based on
> >>Tcp port.
> >>
> >> Configure congestion aviodance on r5 s1 based on the
> >>following
> >information.
> >>
> >> 1) Telnet randomly dropped if queue is over 10 and
> >>completely dropped if
> >over
> >> 30
> >> 2) FTP randomly dropped if queue is over 10 and
> >>completely dropped if over
> >25
> >> 3) Rest of the traffic randomly dropped if queue is
> >>over 30 and
> >completely
> >> dropped if over 60
> >> 4) Drop probability is 1 in 20 packet
> >>
> >> I can configure the random-detect on the int. My problem
> >>is in traffic
> >> assignment.
> >>
> >>
> >>
> >>
> >> My config so far
> >>
> >> int s1
> >> random-detect
> >> random-detect precedence 0 10 30 20
> >> random-detect precedence 1 10 25 20
> >> random-detect precedence 2 30 60 20
> >>
> >> Pease help.
> >> THanks
>
>
========================================================================
====
===============
> Informasikan kegiatan anda di http://kalender.plasa.com
> 50% Lebih Murah untuk Domain dan Hosting di http://idc.plasa.com
khusus di
bulan Februari !
>
========================================================================
====
===============
This archive was generated by hypermail 2.1.4 : Sat Mar 01 2003 - 11:06:27 GMT-3