From: Mike Williams (ccie2be@swbell.net)
Date: Tue Feb 18 2003 - 10:40:22 GMT-3
Yes..... Very dissapointing, as the 2950 is the (according to Cisco)
preferred replacement for the 2900XL series, but we were using 2900XLs
to trunk ISL over to 1900s and it wasn't until we had 40 - 2950's
sitting on our doorstep that we found out that the 2950s only supports
dot1q.
Mike W.
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
DougAtHome
Sent: Tuesday, February 18, 2003 3:24 AM
To: dongmf@huawei.com
Cc: ccielab
Subject: Re: 802.1q and 1900
The 1900 supports ISL only AFAIK. I just went through this with a 2950
and a 1924. The 1924 supports only ISL trunks, while the 2950 supports
only dot1.q. Meaning the two devices are completely incompatible. Very
disappointing.
-----Original Message-----
From: eric dong [mailto:dongmf@huawei.com]
Sent: Tuesday, February 18, 2003 2:28 AM
To: ccielab@groupstudy.com
Subject: 802.1q and 1900
Hi, all
sorry for simple question, i am the poor man who don't have 3550, so i
want use 2900xl and 1900 to test 802.1q. but i have not found where to
config 1900 trunk as dot1q. who can tell me that 1900 can trunk as
802.1q?
eric d
This archive was generated by hypermail 2.1.4 : Sat Mar 01 2003 - 11:06:27 GMT-3