From: Emre Koyuncu (emrekoyuncu@hotmail.com)
Date: Tue Feb 18 2003 - 16:22:54 GMT-3
AFAIK, some versions of IOS cannot perform dynamic mapping on the called
site. (I don't remember which versions cant do it but most of the recent
ones can do it). If it cannot perform dynamic mapping you will need static
mapping with dialer map command. After establishing the connection , you try
"sh dialer map " if you see a mapping , you will not need dialer map. (but
you may still need it to define other arguments )
regards
Emre Koyuncu CCIE #10916
----- Original Message -----
From: "craig rees" <craigrees74@yahoo.com>
To: <ccielab@groupstudy.com>
Sent: Tuesday, February 18, 2003 7:29 AM
> When configuring ISDN.
>
> Only r5 can call r6. I believe on r6 you do not need a dialer map
statement going back to r5.
>
> However with dialer watch and only r5 can call r6 but with dialer watch on
r5 cisco web site show you need
>
> dialer map ip x.x.x.x name r5 broadcast on r6. Why is this anybody know?
>
> It seems to work fine without dialer map on r6 for dialer watch and
without dialer watch.
>
> When do you need or not need dialer map statement on r6 if it cannot make
a
>
>
>
> ---------------------------------
> Do you Yahoo!?
> Yahoo! Shopping - Send Flowers for Valentine's Day
This archive was generated by hypermail 2.1.4 : Sat Mar 01 2003 - 11:06:26 GMT-3