From: Jeff Kesemeyer (jkesemey@bellsouth.net)
Date: Sun Feb 16 2003 - 22:21:32 GMT-3
You are correct, I thought that would be a given since it is called atm
ilmi-pvc-discovery.
You only need the following for pvc-discovery:
#int a0
# pvc 0/16 ilmi
# atm ilmi-pvc-discovery
#
#sho atm vc
VCD / Peak Avg/Min
Burst
Interface Name VPI VCI Type Encaps SC Kbps Kbps
Cells Sts
0 2 0 200 PVC NLPID UBR 155000
UP
#
Jeff Kesemeyer
CCNP, CCDP, MCSE, CNE
www.bradshawlabs.com
"Your CCIE Rack Rental Source"
-----Original Message-----
From: Ong Boon Hui [mailto:ongbh@cet.st.com.sg]
Sent: Sunday, February 16, 2003 7:32 PM
To: Jeff Kesemeyer; 'chenyan'; 'ccielab'
Subject: Re: atm problem
Hi,
I understood you may still need it to discover PVC if necessary, there
is a chance you have to turn it on if you are doing PVC.
Debarros
----- Original Message -----
From: "Jeff Kesemeyer" <jkesemey@bellsouth.net>
To: "'chenyan'" <chenyan@deeptht.com.cn>; "'ccielab'"
<ccielab@groupstudy.com>
Sent: Monday, February 17, 2003 3:38 AM
Subject: RE: atm problem
> No, it is only used when you use SVC's and you don't want to use nsap
> address or esi address commands or L2 to L3 mappings.
>
> Jeff Kesemeyer
> CCNP, CCDP, MCSE, CNE
> www.bradshawlabs.com
> "Your CCIE Rack Rental Source"
>
>
> -----Original Message-----
> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf
> Of chenyan
> Sent: Sunday, February 16, 2003 10:59 AM
> To: ccielab
> Subject: atm problem
>
>
> hi,
> I want to know the ilmi, if I use the manual pvc configuration , do I
> have to configure the ilmi?
>
> Thanks
This archive was generated by hypermail 2.1.4 : Sat Mar 01 2003 - 11:06:25 GMT-3