From: Brian Dennis (brian@labforge.com)
Date: Sun Feb 16 2003 - 20:53:50 GMT-3
Administrative distance is always local to a particular router.
Brian Dennis, CCIE #2210 (R&S/ISP Dial/Security)
brian@labforge.com
http://www.labforge.com
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Rick
Sent: Sunday, February 16, 2003 1:31 PM
To: ccielab@groupstudy.com
Subject: EIGRP summary address
Hello,
I'm summarizing some loobacks on R5 and I'm seeing the summary on R3
with the
more specific routes supressed as I'm supposed too, but the admin
distance is
90 on R3.
What is the purpose of putting the distance at the end of the below
command is
distance is only local?
interface Ethernet0
ip address 172.16.35.5 255.255.255.0
ip summary-address eigrp 35 172.16.55.32 255.255.255.240 5 <---- (there
is my
distance of 5 configure on the ethernet of R5)
Here is what I see on the R3 side:
D 172.16.55.32/28 [90/156160] via 172.16.35.5, 00:04:41,
FastEthernet0/0
Thanks,
Rick
This archive was generated by hypermail 2.1.4 : Sat Mar 01 2003 - 11:06:25 GMT-3