From: Evgeny Tantsura (ivgen@castel.nl)
Date: Sun Feb 16 2003 - 13:48:15 GMT-3
Prior to 12.2 the Priority Queue Was Policing
All the Time for Frame Relay on 7200 and
below; for ATM and Leased Lines It Was
Policing Only during Periods of Congestion;
after 12.2 the PQ ONLY Polices when There
Is Congestion on the Link for All Platforms
> ----- Original Message -----
> From: <rionaldi@cbn.net.id>
> To: <ccielab@groupstudy.com>
> Sent: Saturday, February 15, 2003 9:40 PM
> Subject: CBWFQ
>
>
> > Dear All,
> >
> > I still confuse with the CBWFQ bandiwidth allocation....
> >
> > If I specify let say bandiwidh percentage 50% under certain class... does
> it
> > mean the class only have 37.5% bandiwidth allocation (50% X 75% default
> max
> > reserved bandwidth)?
> >
> That class gets a guaranteed 50% of the bandwidth under conditions of
> congestion. I think the configured bandwidth percentages are additive
> towards the 75% maximum.
>
> > And then let say I have serial let say with 1 Mbps capacity.... does it
> means
> > that I only can use 750 kbps of it bandwidth.. what happen when the total
> > bandwidth I used is more than 750kbps by default ? I is resulting any
> error?
> >
> > Regards,
> > Prio
>
With kind regards/ met vriendelijke groeten,
------------------------------------------------
E. Tantsura
Network Developer
Essent Kabelcom N.V.
Dr.van Deenweg 84
8025BN Zwolle, The Netherlands
Tel: +31-(0)38-850-7642
Fax: +31-(0)38-850-7410
Mob: +31-(0)6-290-80458
------------------------------------------------
This archive was generated by hypermail 2.1.4 : Sat Mar 01 2003 - 11:06:25 GMT-3