RE: IS-IS and OSPF redistribution

From: Khalid A. Kaseb (khalid_ameen@rayaintegration.com)
Date: Sat Feb 15 2003 - 12:19:02 GMT-3

Don't let INARP deal with multipoint interfaces (physical or
subinterface multipiont) configure frame-relay maps instead

-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Kumar, Senthil
Sent: Saturday, February 15, 2003 1:37 PM
To: 'Dang Quang Minh '; ''Cristian Henry H' '; 'rionaldi@cbn.net.id '
Cc: 'ccielab@groupstudy.com '
Subject: RE: IS-IS and OSPF redistribution

 could you do a frame-relay inteface-dlci on a physical interface..

int s0/0
no arp frame-relay
no frame-relay inverse-arp
frame-relay interface-dlci 100
frame-relay interface-dlci 200
ip add 10.0.0.1 255.255.255.0
ip ospf net non-broadcast
!

any clue?

-----Original Message-----
From: Dang Quang Minh
To: 'Cristian Henry H'; rionaldi@cbn.net.id
Cc: ccielab@groupstudy.com
Sent: 14/02/2003 14:48
Subject: RE: IS-IS and OSPF redistribution

If the interface is point-to point subinterface, you don't need
frame-relay map clns.

-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Cristian Henry H
Sent: Thursday, February 13, 2003 7:12 PM
To: rionaldi@cbn.net.id
Cc: ccielab@groupstudy.com
Subject: Re: IS-IS and OSPF redistribution

Im not sure if you need to config a explicit mapping of clns over
frame-relay PVC. With your config over point-to-point sub-interfaces, I
mean frame-relay interface-dlci XXX, you ar getting the map IP/DLCI with
frame-relay inarp, but I'm not sure if you also are getting the map
CLNS/DLCI in order to transfer CLNS routing packets over frame relay
link between R1 and R6. Have you checked it?
With multi-point subinterfaces, you have to config frame-relay map clns
<DLCI-number> broadcast to it works!

rionaldi@cbn.net.id wrote:
>
> How actually the redistribution works? when we are doing
redistribution.. let
> say between IS-IS and OSPF... is it only IS-IS/OSPF routes shown in
the
> routing table is being redistributed. What happen with the connected
> interface that we also put that interface into routing domain (in this
case
> using network command (OSPF) and ip router isis (IS-IS))?
>
> Let say 3 routers
>
> R1 (s1/0.3) --------------- (s4/0) R6 (f0/0) ---------------(e0)R8
>
> R1 and R6 running IS-IS
> R6 and R8 running OSPF
> The redistribution happen in R6 between OSPF and ISIS.
>
> I cannot ping loopback in R8 from R1.. I know the reason why because
the
> segment 10.15.0.0 connecting R1 and R6 is not in the routing table fo
R8. The
> thing I do no know is why that segment is not in the routing table..
because I
> put already that segment into ISIS routing domain.
>
> --------------------------------------------
> Current configuration : 1565 bytes
> !
> version 12.1
> service timestamps debug uptime
> service timestamps log uptime
> no service password-encryption
> !
> hostname R1
> !
> !
> !
> !
> !
> !
> ip subnet-zero
> no ip domain-lookup
> !
> ip audit notify log
> ip audit po max-events 100
> !
> interface Serial1/0.3 point-to-point
> ip address 10.15.1.1 255.255.0.0
> ip router isis
> frame-relay interface-dlci 106
> !
>
> !
> router isis
> net 00.0002.0000.0000.0001.00
> is-type level-2-only
> !
> ----------------------
> Current configuration : 2083 bytes
> !
> version 12.1
> service timestamps debug uptime
> service timestamps log uptime
> no service password-encryption
> !
> hostname R6
> !
> !
> !
> !
> !
> !
> ip subnet-zero
> no ip domain-lookup
> !
> clns routing
> !
> !
> !
> !
> --More--
> 18:08:09: %SYS-5-CONFIG_I: Configured from console ! e
> !
> !
> interface Loopback0
> ip address 6.1.1.1 255.255.255.0
> !
> interface Loopback2
> ip address 150.10.10.1 255.255.255.0
> !
> interface Loopback20
> ip address 202.145.6.1 255.255.255.0
> ip router isis
> !
> interface FastEthernet0/0
> ip address 150.10.20.1 255.255.255.0
> ip ospf priority 100
> half-duplex
> !
> interface ATM1/0
> no ip address
> shutdown
> no atm ilmi-keepalive
> !
> interface Ethernet2/0
> no ip address
> shutdown
> !
> interface Ethernet2/1
> no ip address
> shutdown
> !
> interface Ethernet2/2
> no ip address
> shutdown
> !
> interface Ethernet2/3
> no ip address
> shutdown
> !
> interface TokenRing3/0
> no ip address
> shutdown
> ring-speed 16
> !
> interface TokenRing3/1
> no ip address
> shutdown
> ring-speed 16
> !
> interface TokenRing3/2
> no ip address
> shutdown
> ring-speed 16
> !
> interface TokenRing3/3
> no ip address
> shutdown
> ring-speed 16
> !
> interface Serial4/0
> no ip address
> encapsulation frame-relay
> no fair-queue
> serial restart-delay 0
> frame-relay lmi-type ansi
> !
> interface Serial4/0.1 point-to-point
> ip address 10.15.1.2 255.255.0.0
> ip router isis
> frame-relay interface-dlci 601
> !
> interface Serial4/1
> no ip address
> shutdown
> serial restart-delay 0
> !
> interface Serial4/2
> no ip address
> shutdown
> serial restart-delay 0
> !
> interface Serial4/3
> no ip address
> shutdown
> serial restart-delay 0
> !
> !
> router eigrp 100
> network 6.1.1.0 0.0.0.255
> auto-summary
> no eigrp log-neighbor-changes
> !
> router ospf 100
> router-id 202.145.6.1
> log-adjacency-changes
> redistribute isis level-2 metric-type 1 subnets tag 1024
> redistribute eigrp 100 subnets
> network 150.10.20.1 0.0.0.0 area 0
> network 202.145.6.1 0.0.0.0 area 0
> !
> router isis
> redistribute ospf 100 metric 10
> redistribute eigrp 100 metric 10
> net 00.0002.0000.0000.0006.00
> is-type level-2-only
> !
> ip classless
> no ip http server
> !
> !
> !
> !
> !
> !
> !
> !
> !
> !
> !
> line con 0
> exec-timeout 0 0
> line aux 0
> line vty 0 4
> !
> end
> -------------------------------
>
> Current configuration : 788 bytes
> !
> version 12.1
> service timestamps debug uptime
> service timestamps log uptime
> no service password-encryption
> !
> hostname R8
> !
> !
> !
> !
> !
> !
> ip subnet-zero
> no ip domain-lookup
> !
> !
> !
> !
> !
> !
> interface Loopback0
> ip address 172.168.30.33 255.255.255.224
> !
> interface Loopback1
> ip address 172.168.20.65 255.255.255.224
> !
> interface Loopback20
> ip address 202.145.8.1 255.255.255.0
> !
> interface Ethernet0
> ip address 150.10.20.2 255.255.255.0
> ip ospf priority 0
> !
> interface Serial0
> no ip address
> shutdown
> no fair-queue
> !
> router ospf 100
> router-id 202.145.8.1
> log-adjacency-changes
> network 150.10.20.2 0.0.0.0 area 0
> network 172.168.20.65 0.0.0.0 area 1
> network 172.168.30.33 0.0.0.0 area 1
> network 202.145.8.1 0.0.0.0 area 0
> !
> ip classless
> no ip http server
> !
> !
> line con 0
> line vty 0 4
> !
> end
> . 

-- 
Cristian E. Henry
REUNA

E-mail: chenry@reuna.cl
Fono: 56-2-3370336
.

This archive was generated by hypermail 2.1.4 : Sat Mar 01 2003 - 11:06:24 GMT-3